keithscianna
10/20/2006 12:16:25 AM
Where can i find a turbo kit for a 93 eclipse, I belive its a 4g63. CAn i bolt on the stock turbo system? i have searched but i can only find info in the 420a.
thanks
Sebba
10/20/2006 12:21:21 AM
You want to go an engine swap. You want to swap in a 4G63 turbo motor from ebay they are like $1000.
Alternatively if you dont want to do that you can just get the parts from a turbo 1g and change them over. They are the same and they will bolt right up.
keithscianna
10/20/2006 12:25:00 AM
Ok,
so all i need is all the stock parts and it will bolt right up? what abot oil lines,injectors? wiring?, So basicly if i find a turbo at a junk yard i should just start pulling parts?.
does it ahve the same head, will i have limits on psi?
Sebba
10/20/2006 12:34:51 AM
You will ahve limits on the PSI because its is the non turbo motor (8psi)
You will need like the exhaust system, ECU, Injectors (i think) turbo, manifold, oil lines, Intake, MAF,
Personally i say your better off just getting the 4G63 turbo motor from ebay and bolting that up. It will save you a lot of hassle.
93eclipsegsx
10/20/2006 4:14:17 PM
yes injectors b/c the turbo injectors are bigger and i have stock turbo cams ill sell you.
