[ View Full Version Of This Page ]

Blown Turbo

All Forums » Nitrous, Super Chargers, & Turbos » Blown Turbo

Xavier2k20
1/22/2008 12:44:09 PM
I was just wondering how much a turbo would cost me. Iwas thinking about getting a 95 eclipse gsx, stick, but it has a blown turbo, He said it leaks oil which cause the car to smoke. I was wondering How much would a stock turbo cost, or if the price isn't to excessively more, or bigger turbo. But if it requires me to have to spend even more on the engine i can hold off. I want to build the engine over a period of time. And if possible where to get the turbo your talking. Thanks in advance.  
bestwiseguy
1/22/2008 12:55:04 PM
You can buy the stock t-25 turbo used for around 125.00 usually.  If you want to upgrade to something bigger, you can get an evo3 16g for around 350.00 used usually.  But if you get a bigger turbo you will have to do some fuel upgrades as well as a tuning device and gauges.  check out dsmtrader.com, you can usually find both these on that site.
Xavier2k20
1/22/2008 1:37:36 PM
Let say i bought the the 16 turbo, how much would i have to spend on the fuel system and guages. And how much do mechanics charge to put in. My brother in law is a mechanic and said he's never done a turbo before but is sure he can do it. Is it something Extremely hard to do
Sebba
1/22/2008 1:44:45 PM
No its not. and you only need the other stuff if yo uwant to run it at its full potential.
 
Seriously, a turbo causing a decent oil burn is unlikely.
 
I recomend doing a compression test on the engine before continuing further.
Xavier2k20
1/22/2008 1:52:48 PM
according to the guy the turbo started going bad and now the turbo doesnt even give 25% boost anymore and due to the crack in it it spits oil everywhere causing loads of smoke. I want to put some money into the engine but just what i need to get started. Sorry for wasting your time with dump questions.
bestwiseguy
1/22/2008 1:59:38 PM
I would definately get that fixed asap.  I agree with sebba though it would be a good idea to get a compression test just to see if the engine is worth building up, if not then what your trying to do is pointless lol.
 
Xavier2k20
1/22/2008 2:02:44 PM
just one more question and i'm done. If the engine is bad or if i wanted to go newer. Where could i get a gsx engine from. Websites. What would the engin enumber be
bestwiseguy
1/22/2008 2:06:18 PM
that engine is the 4g63, there are several websites you can get one from including one i posted earlier in this thread.  Just do a search on this forum and you will find tons of info and sites.  Also look up a 6 bolt block if you do end up getting a new motor.
Xavier2k20
1/22/2008 2:11:45 PM
thanks so much
bestwiseguy
1/22/2008 2:37:13 PM
anytime man
Sebba
1/22/2008 7:47:21 PM
In the DSM world, breakage is an excuse to upgrade. BuschurRacing makes a good short block if you choose to do that. You can get an engine from a GST or a GSX, they are the same. A person on here had a bad experiance on ebay with getting a 4g63 that had some heat scoring, however they promptly sent him another, and let him keep the first one. So, what ever.
bestwiseguy
1/22/2008 8:01:09 PM
And trust us, you are going to be doing alot of upgrading lol.  These cars are a blast to drive, but are definately not known for their reliability.
Related Threads

[ View Full Version Of This Page ]

Return to the Mitsubishi Forum home page - Archive Home