Clutch not working

Hey all! as you can see, i am new here. i am a bit mechanically inclined so i thought i would ask this question before it gets sent to the mechanic. I have a 98 eclipse rs 5spd. driving it home last night, i pushed in the clutch to shift and heard a click...now i have no clutch whatsoever. had been working fine, no problems. when my bro pushes in the clutch, i can see it move on the far side of the tranny...whatcha all think? thanks for the help.
chris

Check your fluid levels. Fill it up and look for leaks in the lines. Your master cyl could be gone.

fluids are full, is the master cylinder hard to replace or expensive? Would that create that click noise I heard?

i checked the master cyl and it seems to be working fine. Now im stuck, what else should i look for?

any thoughts? thanks.

Im not too sure. You could have broken something in the mechanism. I would trace it from the pedal to the clutch very carefully.

im just going to get a clutch kit...it does have over 130k on it.

Ok i shoulda asked how many miles are on it. Yea its about due lol

any tips before i go pulling out the tranny?

well, since your clutch not working... you need your clutch replacement... but identify first your cause of your clutch failure... and 
clutch kit
are advisable when the bearing of your vehicle makes noise or disintergrates, or the springs becomes weak.