95 gst
2/10/2007 4:27:36 PM
hi everybody,
Im new to thise site, and I need some info. I have a 95 gst and Im trying to drop an evo 3 motor in it. What do I need to do to make this happen? My 4g63t has a cam and crank sensor and its a seven bolt main. Is the evo 3 a 7 bolt main? Can I use my same wiring harness and ecu? Can I use my gst tranny? Any info, web sites or books would be greatly appreciated.
Thanks for your help.
TheEngineer
2/10/2007 6:26:03 PM
they are basically the same motor. Why would you want to swap the evo motor in?
paintballproam
2/10/2007 6:35:37 PM
quote:
ORIGINAL: 95 gst
My 4g63t has a cam and crank sensor and its a seven bolt main.
Damn a seven bolt main huh?
that must be the strongest motor ever. The most ive ever seen was a 4 bolt main. My 4g63t was a 2 bolt main. I had a 7 bolt FLYWHEEL but thats about it
EMonz57
2/10/2007 6:44:13 PM
quote:
ORIGINAL: paintballproam
quote:
ORIGINAL: 95 gst
My 4g63t has a cam and crank sensor and its a seven bolt main.
Damn a seven bolt main huh? that must be the strongest motor ever. The most ive ever seen was a 4 bolt main. My 4g63t was a 2 bolt main. I had a 7 bolt FLYWHEEL but thats about it
I was thinking the same thing
95 gst
2/10/2007 9:30:13 PM
So the seven and six bolt means the #of bolts on the flywheel. ok. wasnt sure. this is my first mitsubishi. So whats the differences between the gst and the evo 3 if they are practically the same motor. And my main consern is the crank sensor and cam position sensors. will the car start without them????????
racerx55
2/10/2007 11:15:23 PM
I dont think its gonna run wtihtout them sensors
considering they tell the ECU the engine is moving to control spark & injector pulse.
TheEngineer
2/11/2007 4:15:10 PM
exactly the car wont start without them functioning correctly.
TheAdvocate
2/11/2007 4:23:30 PM
A big diff, is the head.. Im not sure the 3 but with the newer evo's the heads are much bigger..
