Exhaust

Ok guys iv decided to keep my eclipse and begin making it into a money pit. I thought id first start with the exhaust. Instead of just getting an Apexi turbo app. cannister muffler, i would go ahead and get a larger downpipe and maybe larger piping running to the muffler. My question is how wide should the downpipe and piping be? im running with the sick stock t25 right now but i will be upgrading to the evo 16g soon. Would the downpipe flange fit both? I also "searched" the site for these questions. Thanks

You rock for using the search function. As far as what downpipe would match up, i really dont know.
 
You could get the Apexi N1, not just the tip, and get a downpipe that would match up and that would be fine. For a 16g, the 2.5" piping will be just fine.
 
There are a few other crutial things you should make sure before modding your car. For example, fixing any tiny mechanical problem you have. This means oil leaks, coolant leaks, check engine light. If you dont know when your timing belt was changed, change it (every 60k). Also do a compression test to see if the engine is even worth modding. You never know.
 
As far as getting the exhaust, there are other cheaper things at this stage that will be more benifitial to you. For example, a boost controller and a boost gauge set at 16psi would help you a lot more than an exhaust would.
 
Any questions?

2.5 thanks man. And yeah lol the whole oil/coolant problem has been fixed, It was the oil cooler. The engine now has new belts and plugs, its in great shape. I have 3 guages and more minor things but i wont be installing these and modding my car for about 3 months. I should then have enough money to buy all the mods i want. Right now im just planning.

Good call!
 
How many miles are on the car?

186K. but the only other owner never ragged it. It doesnt smoke or miss, it really is a good engine.

damn thats alot of miles . But as long as its holding up. Compression test is definetly a good idea then.
 
As far as what downpipe. They will all fit the t25 as well as the 16g because both turbos use the same o2 housing. 2.5" will be fine for a downpipe, but 3" is definetly perfered for the catback

But what downpipe will match up with the N1 catback?
 
Uuuh, how old is the clutch? lol

well any one since the n1 catback is designed to bolt to the stock cat. and the downpipes are designed to bolt to the stock catback. They all use the same flange sizes usually

Thats what i thought at first, but i told that to someone and it turned out to be not so true and he bitched me out.

Was it because the flanges were welded at a different degrees? That happened to me, easy fix though I just made a plate to fit inbetween the two and just bolted the two to the plate. Tried to upload a photo to show ya, but all I have is paint which saves it as bitmap.

My exhaust is the Apexi N1 full 3 inch turbo back...I welded in a cat that would fit the system...it works awesome....no "catback" tiny 2.5 inch sh!t for me...never understood why people would only do from the cat back...do the whole exhaust! But I bought mine used for like $300 from a friend of mine and it only had about 10k miles on it when I bought it...so if I bump up to a bigger turbo which I have no idea how big I wanna go yet, I'm gonna have to switch downpipes or to some "modification" to mine so it would fit the bigger turbo setup?

I got apexi turboback with no cat yes emissions here "requires" a cat but i have yet to be failed for not having on no cel gets thrown because the O2 are still reading the before and after cat as within range i bought mine from a guy that races DSM cars and he told me it wouldn't throw a code or cause any dmg i say go 3" all the way back only issue u may run into is the flange that hooks to the turbo is made for a 2.5" exhaust system

You can do the 3" with the magic spark plug anti-foul fix : )

Wow thanks guys. Iv done the searching and found all the parts, its going to be a homemade system running 3 inches to the Apexi turbo style muffler. The downpipe i found has the 2.5 inlet and imediatly widens to 3in.
 
Check out this new kit from ebay http://cgi.ebay.com/Bolt-OnTurbo-Kit-For-DSM-TD05H-Big-16G-Evo-3-GT_W0QQitemZ370001358807QQihZ024QQcategoryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
 
What you guys think?

no way i would buy that. The price alone makes me weary and being on ebay. I guarentee the turbo is a POS and all the parts are as well. Dont buy that

eBay is NOT a performance parts store. Stay away from it!

For turbos contact Slowboy Racing or maybe Buschur Racing...don't buy the e-bay wanna-be turbos! You'll blow your sh!t up with those! Those are just a money making scam. And don' buy anything that says for example "Apexi style" cuz it's not the real thing! Don't do your car cheap man, you'll regret it!