[ View Full Version Of This Page ]

Flip-ups not working

All Forums » 1st Generation » Flip-ups not working

lillben07
6/2/2008 7:27:56 PM
I have a 91 Eclipse GS. When I bought it the guy told me that the driver side flip up motor was not working, which wasnt a big deal to me. Shortly after I bought the car I plugged the motors in to check them. Indeed, the passenger side worked but the driver side didn't. I got a replacement motor reciently from a parts car. Before I installed it I pluged it in to make sure it worked and it did spin when I hit the flip ups button. Now, after installing it, neither of the motors work. My freind and I check the relay and the fuse and both are good, so we are both lost as to why they are not working. If anyone has any idea as to what I should try, please let me know. Any ideas or suggestions are greatly appreciated!! Thanks!
TheEngineer
6/2/2008 7:39:48 PM
id start looking at the wiring. Usually headlights are run in series so you may have messed up the wiring with the new headlight causing neither to work. Other than that i can only think of the fuse or relay. Make sure you are looking for the ones for the motor and not the headlight lamp
mack29730
8/7/2008 8:52:07 PM
i had the same problem fixed the then the other went out and i have the perment fix i upgraded my 91 front end to a 93 front in everything bolted up only had to drill a few hole for the headlights
dsm1990gsx
8/8/2008 2:09:22 PM
Check your headlight switch.

[ View Full Version Of This Page ]

Return to the Mitsubishi Forum home page - Archive Home