iwantmooreshawn
10/22/2006 4:07:44 AM
i was told that could be one reason i have no compression in any of the cylinders (and it won't start or run) just seein if anyone has any problems themselves with this situation
Sebba
10/22/2006 8:16:57 AM
Nah i would say that would be true if it was only one cyl with no comp.
iwantmooreshawn
10/22/2006 2:30:15 PM
what do you think the problem would be if it does have no compression on any cylinder
Sebba
10/23/2006 4:52:59 AM
It must be something in the head.
TheEngineer
10/24/2006 11:44:51 AM
sounds to me like either your timing is off, or youve bent the valves. But to get zero on all is pretty unusuall, id also make sure your doing the test correctly
iwantmooreshawn
10/24/2006 1:00:19 PM
i know how to the test ok im a tech this problem is just dumb ass **** see the timing marks are still aligned maybe it jumped the crank sprocket but i dont know the valves aren't bent either so i dont know
TheEngineer
10/24/2006 2:52:02 PM
ok i was just making sure. Well i would try a leak down test then and see what happens there
Sebba
10/24/2006 2:56:48 PM
wtf is going on here?
I cant think of anything.......
TheEngineer
10/24/2006 3:29:00 PM
i know im just as confused to see zero compression on all cylinders is f'd up.
iwantmooreshawn
10/24/2006 9:34:02 PM
i know now you get my frustration it ran fine one day and 10 yours later the next day it didn't run at all and theres no compression at all its stupid as hell
TheEngineer
10/25/2006 7:56:51 AM
what kinda car is this on anyways
iwantmooreshawn
10/25/2006 12:59:55 PM
its a 90 mitsu eclipse gs turbo
