BlackMurcielago
1/10/2007 9:49:00 PM
Okay my six bolt is being sawpped in this weekend and hes throwing in a Manuall boost controll, boost, air/fuel, and oil psi gauge.
Its a 6-Bolt
Has 4 Layer Head gasket
and ARP Head studs
The gaskets can hold 80 and the studs around 120 pounds
But my question how much boost i can safly run on that crank, stock pistons and rods. Im putting in a 25/28 BB turbo to.
So what do you guys think
Sebba
1/10/2007 10:39:50 PM
On that turbo...20 safely
Are you running stock fuel?
BlackMurcielago
1/10/2007 11:10:37 PM
Stock injectors, rail, pump, and Electronics
EMonz57
1/11/2007 2:06:44 AM
quote:
ORIGINAL: BlackMurcielago
Stock injectors, rail, pump, and Electronics
why even ask then lol.... If its a bigger flowing turbo than stock you may even not want to push more than 15
paintballproam
1/11/2007 6:43:19 AM
It depends on the turbo. Im not going to say you can run 17psi because if you have a T25, then thats fine, but if you have something like a FP3065 or GT40R, your motor will blow. It depends on the flow rate of the turbo. On a stock turbo however, 15 would be good.
TheAdvocate
1/11/2007 6:39:22 PM
quote:
ORIGINAL: EMonz57
quote:
ORIGINAL: BlackMurcielago
Stock injectors, rail, pump, and Electronics
why even ask then lol.... If its a bigger flowing turbo than stock you may even not want to push more than 15
Same.. 15 would prolly be good for you..
BlackMurcielago
1/11/2007 9:50:36 PM
What if i do get larger injectors, lines, pump, rail and all that
paintballproam
1/12/2007 6:21:03 AM
What turbo are you going to run? Even if the 6 bolt is stock, they have been known to handle 400hp+.
TheAdvocate
1/13/2007 6:51:47 PM
I wouldnt go over 18lbs with even after those upgrades.. But if its your daily driver and you dont want to start fixing things, i would stick with about 16-17..
