johnthornhill
4/27/2007 2:38:00 PM
Hello everyone it's me again, last night I posted a request for help and got some very good advice. Now I need more.
Here's whats going on. I have a 97 eclipse that I just dropped a new engine into, It's notgetting fire.
I checked and it's getting fire all the way up to the wireing harnes that conects to the coil, I've checked restince across one and four and two and three and according to the manuial its right. I also checked the restance on the female conector on the coil and it too checked out. Does anyone have any sugestions? has anyone ever heard of the conection going bad and would that cause it not to fire? I am quickly running out of ideas here, any help would be greattly appreated. P.S. forgive my spelling.
TheEngineer
4/27/2007 4:46:01 PM
I bet you its either the cam angle sensor or the crank angle sensor. Those not being hooked up correctly will cause a no spark condition
year1lazer
5/10/2007 10:36:26 PM
try checking your transitor pack???
silvercoupe97
5/10/2007 11:48:45 PM
The ASD relay with cause this issue too.
I noticed that you have a GS.
