paintballproam
10/8/2006 12:26:44 PM
Who on this site has the most horse power? im just curious, who has the most hp on an evo? a talon or eclipse? a 3000gt? and who has the most hp on the site(preferably dyno proven)
93eclipsegsx
10/8/2006 12:56:03 PM
0 for now.
. im running on gopes and dreams.
EMonz57
10/8/2006 2:15:23 PM
No dyno but im a little over 300 and extreme dynod his IX at 315WHP (we have very similar mods not sure but we are prob about the same HP since he is MIVEC)
davidmitsusrock
10/8/2006 3:51:00 PM
i dont know if he is on this site but a guy i talked to yesterday showed me his dyno chart....386whp in a 3rd gen eclipse gt(supercharged running 19 psi) but if hes not on the site then nvm lol
EMonz57
10/8/2006 3:57:23 PM
quote:
ORIGINAL: davidmitsusrock
i dont know if he is on this site but a guy i talked to yesterday showed me his dyno chart....386whp in a 3rd gen eclipse gt(supercharged running 19 psi) but if hes not on the site then nvm lol
386 is a little low for a Ripp stage III Eclipse most I see get at least 400HP he must have dynod in hot temps
98eclpsrider
10/8/2006 4:19:57 PM
i'm hoping to be around 225-230 just a little above stock with my mods.
EMonz57
10/8/2006 4:23:46 PM
quote:
ORIGINAL: 98eclpsrider
i'm hoping to be around 225-230 just a little above stock with my mods.
ya but stock your car is only about 160-175 WHP it is 210 at the motor. we are talking wheel HP no motor
98eclpsrider
10/8/2006 4:38:06 PM
quote:
ORIGINAL: EMonz57
quote:
ORIGINAL: 98eclpsrider
i'm hoping to be around 225-230 just a little above stock with my mods.
ya but stock your car is only about 160-175 WHP it is 210 at the motor. we are talking wheel HP no motor
OH ok, then i have no clue lol.
Sebba
10/8/2006 7:20:00 PM
297 and lost the dyno print out.. however its printed in Max Power... because it was the day it won the 2.0L duno competition :)
EMonz57
10/8/2006 7:39:02 PM
quote:
ORIGINAL: Sebba
297 and lost the dyno print out.. however its printed in Max Power... because it was the day it won the 2.0L duno competition :)
its not even your car that why you dont have the dyno print hahahaha
Sebba
10/8/2006 7:56:22 PM
stfu
I have the dyno print of it doing 278. It will be my car once i take my test smart ass.
EMonz57
10/8/2006 8:31:00 PM
quote:
ORIGINAL: Sebba
stfu
I have the dyno print of it doing 278. It will be my car once i take my test smart ass.
hahahaha just messing with ya... but honestly who owns the car now??
Sebba
10/8/2006 8:40:39 PM
legally registered in my moms name
Lil Evo
10/8/2006 11:09:53 PM
I'm pretty sure I've got the 5th gen Mirage catagory, at least here state side.......still, the Mirage only puts down between 165-180hp at the wheels
. I need to build my engine to handle more boost, 9psi is getting pretty boring.
davidmitsusrock
10/8/2006 11:35:50 PM
thats pretty imprsessive for what a sohc 1.5l?
Lil Evo
10/9/2006 12:06:44 AM
*sigh* yes. i want something bigger
shreff99
10/9/2006 1:35:24 PM
I'm about 250 ish and growing
Sanguinius
10/9/2006 6:56:30 PM
Stock mine has 189HP. I've done a few things to improve that though. No dyno yet not until I finish everything. I'm probably a bit over 200 at the moment though. (88 Conquest TSi 2.6L turbo G54B).
estraw
10/9/2006 6:57:48 PM
ya, im pretty high up on the hp list lol, 155hp i think my car has. can you say 17.1 sec 1/4 mile?!?!
oh_what_up
10/9/2006 7:18:11 PM
quote:
lets here the mods then
Dejon tool 3in intake pipe w/ high flow filter
SBR FMIC
2.5 in GM Maf in blow through set up
MAFT
Tial BOV
Magnus Intake Manifold
660 cc Injectors
3 angle valve job, ported, rebuilt head
COMP 101200 camshafts
Magnecor 8.5 wires (soon to be coil on plug)
NGK plugs one stage colder
Cometic Headgasket
ARP head studs
SBR tubular exhaust manifold
PTE 50 trim
VRS 3in turbo back exhaust w/ o2 eliminator dump tube
SAFC-2 (AEM EMS and AEM twin fire CDI are sitting on my desk)
SBR MBC at 18 psi
EMonz57
10/9/2006 7:22:23 PM
quote:
ORIGINAL: estraw
ya, im pretty high up on the hp list lol, 155hp i think my car has. can you say 17.1 sec 1/4 mile?!?!
thats 155 motor HP those cars only make 109 at the wheels I know from my past lol
EMonz57
10/9/2006 7:23:01 PM
quote:
ORIGINAL: oh_what_up
quote:
lets here the mods then
Dejon tool 3in intake pipe w/ high flow filter
SBR FMIC
2.5 in GM Maf in blow through set up
MAFT
Tial BOV
Magnus Intake Manifold
660 cc Injectors
3 angle valve job, ported, rebuilt head
COMP 101200 camshafts
Magnecor 8.5 wires (soon to be coil on plug)
NGK plugs one stage colder
Cometic Headgasket
ARP head studs
SBR tubular exhaust manifold
PTE 50 trim
VRS 3in turbo back exhaust w/ o2 eliminator dump tube
SAFC-2 (AEM EMS and AEM twin fire CDI are sitting on my desk)
SBR MBC at 18 psi
AEM EMS is the way to go.
