How to adjust hydraulic belt tensioner?

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

How to adjust hydraulic belt tensioner?

Printable Version

Mitsubishi >> Mitsubishi Models >> Mitsubishi Montero & Montero Sport >> How to adjust hydraulic belt tensioner?

Page: [1]

Message

<< Older Topic Newer Topic >>

How to adjust hydraulic belt tensioner? - 10/4/2004 6:55:09 PM

rvrexpy

Posts: 1
Joined: 10/4/2004
Status: offline

I replaced my water pump and had to remove the timing belt. I've now got all the timing notches in the correct position and the belt reinstalled, but I'm having a problem with setting the timing belt tension.

I compressed the pin on the hydraulic belt tensioner. However I removed the tensioner wheel and found that the bolt is not in the exact center. I am now having trouble getting the wheel in the correct position before I release the pin in the belt tensioner.

Does someone know of the correct procedure for putting the timing belt on? I'm also having trouble finding a repair manual for my 97 Montero Sport. Anyone know where I can get one?

Thanks In Advance,
Johnny

Post #: 1

RE: How to adjust hydraulic belt tensioner? - 11/15/2004 4:51:48 PM

DarkManC

Posts: 87
Joined: 11/15/2004
Status: offline

The timing belt adjuster is preset and you can not adjust it.You have to replace the timing belt adjuster and your problem should be solved.

(in reply to rvrexpy)

Post #: 2

RE: How to adjust hydraulic belt tensioner? - 1/31/2005 1:33:23 PM

Winshawn

Posts: 269
Joined: 1/31/2005
Status: offline

Hey, that is not right. You need to compress the hydraulic tensioner. Then tighten the belt with that offcenter bolt thingy. Then release the hydraulic tensioner.

_____________________________

'90 Montero (sold-sadly)
'95 Montero LS (166k) - my car
'03 Montero Limited (36k) - wife's car

(in reply to DarkManC)

Post #: 3