po300

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

po300

Printable Version

Mitsubishi >> Tech Help and Information >> Everything else >> po300

Page: [1]

Message

<< Older Topic Newer Topic >>

po300 - 12/9/2006 3:33:47 PM

xslim69

Posts: 39
Joined: 4/23/2006
Status: offline

i have a ramdom missfire on a 97 gst. i have replaced 2 coil packs, plugs, and have msd superconductor wires, i also replaced the maf. im in a nut shell i dont know what could be causing the problen, i replaced all of the ignition system. i been trying to fix this proble for about 6 mounths. now

_____________________________

1997 Eclipse GS-T, 6 bolt swap with alot hp,alpine iva d310- rockford all around, full apexi exust,in take....ect

Post #: 1

RE: po300 - 12/9/2006 4:07:54 PM

Manybrews

Posts: 751
Joined: 5/23/2003
From: United States
Status: offline

have you checked compression? Correct timing? fuel pressure?
there are dozens of things that could cause a misfire. Why not get it professionally diagnosed instead of shotgunning parts at it.

also, aftermarket wires (like the MSD) are trash. Factory wires are definatly a much higher quality.

(in reply to xslim69)

Post #: 2

RE: po300 - 12/9/2006 6:49:04 PM

xslim69

Posts: 39
Joined: 4/23/2006
Status: offline

it is a brand new motor. yes it has the right fuel pressure, ect. o and when u run a msd ignition box (like i am) u need to run their supedcoductor wires. also the stock wires do the same thing.

_____________________________

1997 Eclipse GS-T, 6 bolt swap with alot hp,alpine iva d310- rockford all around, full apexi exust,in take....ect

(in reply to Manybrews)

Post #: 3