EGR block off! (Full Version)

Mitsubishi >> Tech Help and Information >> PCM & Fuel Systems

EGR block off!

  

bud660r -> EGR block off! (12/28/2006 11:42:26 AM)

well when i got my new intake all of the hses and stuff that were conected to the stock air box are all just hanging there now, i have nothing goint to my header from the airbox any more, so how do i do an EGR block off ?

  
VR4GARY -> RE: EGR block off! (12/28/2006 11:45:49 AM)

Go to the 3SX website.

bud660r -> RE: EGR block off! (12/28/2006 12:14:32 PM)

and i am looking for?

paintballproam -> RE: EGR block off! (12/28/2006 4:02:24 PM)

just buy a block off plate off SBR or extreme psi or something

silvercoupe97 -> RE: EGR block off! (12/29/2006 1:56:57 AM)

Yup, a block off plate and plugs for the hg nipples on the TB and the mid sized one that goes to the intake pipe.  I might suggest a gasket for the blockoff plate too, I had a tiny leak from my blockoff plate and I used an old piece of tin to sub as a gasket...it's still working btw.  Even an old or new, lol, soda can will work (assuming you do know that I mean to cut it to shape).
Might I suggest FFWD Connection. 
[image]http://www.ffwdconnection.com/cboplate2.JPG[/image]
They have a copper plate for just this reason
quote:

The copper alloy will embed with the mating surfaces and insure a tight seal...better than a stainless or aluminum plate.

I have an aluminum one btw [;)], hence my suggestion.

Hey VR4GARY, bud660r has an Eclipse...I'm just saying [:)]
Although this middle one looks like ours.
[image]http://www.3sx.com/store/catalog/egr-plates-3sx-blue-04-500.jpg[/image]

bud660r -> RE: EGR block off! (12/29/2006 11:46:29 AM)

thanks alot for the clear answer silvercoupe!

it just a plate right nothing special about it? if so i could just make one out of alum "i work at a machine shop" we have alot of aluminum layin around!

silvercoupe97 -> RE: EGR block off! (12/29/2006 6:49:36 PM)

quote:

ORIGINAL: bud660r

thanks alot for the clear answer silvercoupe!

it just a plate right nothing special about it? if so i could just make one out of alum "i work at a machine shop" we have alot of aluminum layin around!
Yup, any will work, just make sure that it's flat and you're good to go.  [:)]

bud660r -> RE: EGR block off! (12/31/2006 12:34:51 PM)

is there any benifits to doing the egr block off? or is it just to get rid of all that crap from the stock intake!

silvercoupe97 -> RE: EGR block off! (12/31/2006 7:39:49 PM)

..that and a cleaner manifold+ and less gas milage (differs from car to car).  I've got a nice big opening where my battery and EGR used to be [:D]

paintballproam -> RE: EGR block off! (1/1/2007 9:08:49 PM)

How much worse gas mialage?

  

Page: [1] 2 3 4 5   next >   >>

Return to Mitsubishi Forum home page or view the Full Version of this page.