|
off roader -> RE: 4x4 problems!!! (1/11/2007 1:12:54 PM)
|
You need to disassemble the front hubs to remove the old lube and put fresh lube in. It's not a simple task and there are lots of parts so if you don't know what you're doing I recommend having a shop do it. You can probably remove the hubs yourself (carefully making sure it doesn't come apart after you remove it and then bring it to a shop to have it cleaned and relubed. Also, I just re-read your post and you're saying when you're in 4L you can drive fast? That's not good. When you shift into 4L it's a mechanical linkage that does this not an electronic one that can easily fail. Also, even if your front wheel's don't engage due to the bad hubs, your rear will still run in 4L and you shouldn't be able to drive fast w/out really winding out your engine. Can you confirm this?
|
|
|
|