|
trident -> RE: keyless remote question (3/6/2007 9:15:34 PM)
|
I have trouble with programming the remote. I got instructions from the web, and here's what I did: I checked that my lock switch worked. It did. I inserted the car key and left it in the lock/off position. Since I don't have an OBD-II scan tool, I used a paper clip to connect pin1 and pin4, which is supposed to ground pin 1. I turned the key to ACC position, and turned it back to lock/off position. According to all the programming instructions that I got from the web, the lock was supposed to lock and unlock itself at this point, signalling that it was ready for programming. Unfortunatelly, nothing happened at all. I repeated the above steps a few times but still got no luck. Any help is greatly appreciated.
|
|
|
|