Grills (Full Version)

Mitsubishi Forums >> Show Time >> Exterior

Grills

  

EmberSpyder -> Grills (3/18/2007 7:55:13 PM)

So i desided instead of paying like 100$ to 150$ for those grill fillers on my eclipse; I am just going out to home depot and get some grating. Then cut it and paint it. I made the templates today. Has anyone else done anything like this that might have some segestions or tips?

  
2nd g eclipse gst -> RE: Grills (3/30/2007 2:36:52 AM)

ive done it, its a whole lot cheaper and works the same good luck!!! post some pics when ur done...

TheEngineer -> RE: Grills (3/30/2007 8:01:55 AM)

i used to actually make them for cars and sell them on ebay. They work fine. Also lowes sells large sheets of them which i switched to since it was alot easier because they werent bent like the grates at home depot. Cutting is a killer on the hands though[;)]

NubianSithLord -> RE: Grills (3/30/2007 8:19:56 AM)

This is for TheEngineer I am glad I read this post, I have a question how do you attach them after they are cut. I was going to order one until I heard you could just get the stuff from home depot. Do you have to take off bumper/ I have 03 so all I need is the one piece in the front.

TheEngineer -> RE: Grills (3/30/2007 2:31:23 PM)

well the 03 is alittle bit of a pain because you have more of a rounded opening than the 00-02 which is just a rectangle. But the best way to cut it would be to leave small tabs extra over what it takes to fill the hole. You know what i mean. Maybe like 3 on top and 3 on bottom. Then fold each tab over and drill small holes into the bumper. Then just use a small bolt, washer and nut and fasten it to it. Thats the best way to do it. The other alternative is a clear glue, but that looks like **** when its done. Just take your time measuring and cutting to get the size exactly right. Like i said though the 03+ is alittle tougher. Good luck

WPSpyderGT01 -> RE: Grills (4/7/2007 3:36:27 PM)

thinking about making one myself now =D

EmberSpyder -> RE: Grills (4/8/2007 3:11:29 PM)

yeah thats what i was going to do. I was going to leave little tabs around the outside and then attach it with self tapping screws and washers.

  

Page: [1]

Return to Mitsubishi Forum home page or view the Full Version of this page.