Carbon Fiber Hood

Printable Version

Mitsubishi Forums >> Show Time >> Exterior >> Carbon Fiber Hood

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

Carbon Fiber Hood - 12/16/2004 1:19:37 PM    DrAgOnBoY45479   Posts: 31 Joined: 12/16/2004 Status: offline Im new to this so here goes... I have a black '97 Eclipse RS with just a few mods done to it.. I have painted some of the interior parts in my car green, painted my calipers and drums the same color green, painted the Mitsubishi symbol on my rims the same color green, painted various parts of my engine that same green, i have some angel eye black projectors and clear bumper corners, also some reverse glow or indiglow (whichever they are)... anyways, i want to get a carbon fiber hood for it now but i dont know which one would look best on my car... i plan on getting some Z3 fenders and a body kit, but the body kit is again a whole different topic... So, which type of CF hood do you think i should invest in? Any help or suggestions would be appreciated! Attachment (5) < Message edited by DrAgOnBoY45479 -- 12/16/2004 1:22:05 PM > Post #: 1

RE: Carbon Fiber Hood - 12/16/2004 7:21:04 PM    vertstanggt Posts: 583 Joined: 12/2/2004 Status: offline LOL, oh thank god you had those pictures. I read that and went oh no, cause I knew those kids in high school and in my auto tech class. But you actually did a good job painting and it looks pretty good. Especially the valve cover, you clear that too? As for the hood I'd almost say just get a stock style, with all the other stuff you want to do to the exterior it might be nice to keep the hood low key. _____________________________ 1997 Eclipse GST Greddy intercoolerpiping/Type S, Turbo Timer, K&N cone, slotted/drilled rotors. 1986 Ford Mustang GT Convertible with some goodies (in reply to DrAgOnBoY45479) Post #: 2

RE: Carbon Fiber Hood - 12/16/2004 9:54:35 PM    DrAgOnBoY45479   Posts: 31 Joined: 12/16/2004 Status: offline yea.. i was thinkin the same thing about having just a OEM style CF hood.. i really think a CF hood would look awesome on a black car... Oh and no i didnt clear the valve cover yet because i still need to get some tape off of the writing on it... after that im going to clear it... also thanks for the compliment I spent alot of time painting those parts and i thought they turned out pretty darn good < Message edited by DrAgOnBoY45479 -- 12/16/2004 9:57:03 PM > (in reply to vertstanggt) Post #: 3

RE: Carbon Fiber Hood - 12/16/2004 11:08:34 PM    vertstanggt Posts: 583 Joined: 12/2/2004 Status: offline Yea, they did, I'm suprised the valve cover isn't cleared, it looks pretty deep. _____________________________ 1997 Eclipse GST Greddy intercoolerpiping/Type S, Turbo Timer, K&N cone, slotted/drilled rotors. 1986 Ford Mustang GT Convertible with some goodies (in reply to DrAgOnBoY45479) Post #: 4

RE: Carbon Fiber Hood - 12/16/2004 11:26:14 PM    DrAgOnBoY45479   Posts: 31 Joined: 12/16/2004 Status: offline just a lot of coats i guess... (in reply to vertstanggt) Post #: 5

RE: Carbon Fiber Hood - 12/17/2004 1:28:46 PM    SpyderGS   Posts: 1015 Joined: 2/15/2004 From: United States Status: offline That valve cover does have an excellent paint job, really good stuff. Check out the EVO style hood, i like it but somehow it doesn't go with the curves of the eclipse. Also, There's the bomex style CF hood, but that's kind expensive. It does look good though. I think a black interior would look better than the stock gray interior though. If you want a stock black interior, you can get the piece's from a dodge avenger, or older chrysler sebring. You can find the entire dash, door panels, and carpet, or pretty much everything you haven't painted! They'll fit right up, and they're really nice looking. (in reply to DrAgOnBoY45479) Post #: 6

RE: Carbon Fiber Hood - 12/19/2004 3:55:21 PM    DrAgOnBoY45479   Posts: 31 Joined: 12/16/2004 Status: offline really? i didnt know that... thanks... i think im going to start checking out the junk yards, now... lol < Message edited by DrAgOnBoY45479 -- 12/19/2004 3:56:08 PM > (in reply to SpyderGS) Post #: 7

RE: Carbon Fiber Hood - 12/19/2004 9:20:07 PM    midnght Posts: 213 Joined: 12/19/2004 From: Frederick, MD Status: offline VIS carbon fiber hoods are TOP quality pieces. They are great looks and fit wise. Most companies on EBAY will use thier name like....... "VIS quality" in thier writeups. Do not be fooled by imitations...damn I sound like a salesman hahaha. But seriously there are some out there that have some fitament issues and such. < Message edited by midnght -- 12/25/2004 1:06:33 AM > _____________________________ ~Chad Pics of the GS-T (in reply to DrAgOnBoY45479) Post #: 8

RE: Carbon Fiber Hood - 12/24/2004 10:27:22 PM    vertstanggt Posts: 583 Joined: 12/2/2004 Status: offline Yea, I found some things that had applications including the seabrings, that's pretty cool you can mix and match that stuff. _____________________________ 1997 Eclipse GST Greddy intercoolerpiping/Type S, Turbo Timer, K&N cone, slotted/drilled rotors. 1986 Ford Mustang GT Convertible with some goodies (in reply to midnght) Post #: 9

RE: Carbon Fiber Hood - 1/14/2005 3:58:49 PM    GST WNB Posts: 44 Joined: 1/14/2005 From: Chillicothe,OH Status: offline Get a VIS hood all the other brand DONT FIT RIGHT. _____________________________ 96 Eclipse GS (in reply to vertstanggt) Post #: 10

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mitsubishi Prices

Mitsubishi Vehicles
3000GT Lancer
Diamante Zinger
Eclipse Outlander
Endeavor Raider
Galant Lancer Evo

Top 10 Posters
sebba 14165 emonz57 11262 theengineer 10296 rcjr9186 5631 sanguinius 4753 dusty eclips 4364 davidmitsusr 3359 jpmontero98 3289 silvercoupe9 3038 tidus10 2767

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.