blown motor (Full Version)

Mitsubishi >> Tech Help and Information >> Internal Lounge

blown motor

jdm91hf -> blown motor (4/28/2007 6:47:18 PM)
ok guys blown engine haha 4g63t what would have caused this?i got it this way,the number 1 is broken would the oil pump be the cause? it was full of oil and antifreeze, would it have been over revved? im rebuilding another engine for it but i need the oil pump out of this one, a new one up here is $300 buxx to get one. the engine is the 6 bolt 92 gsx. any help is welcome thanks!!

EMonz57 -> RE: blown motor (4/28/2007 6:53:01 PM)
the new engine or the old engine or both are 6 bolts? is sounds like the motor isnt blown oil and antifreeze in the cyl usually means the headgasket let go

jdm91hf -> RE: blown motor (5/4/2007 11:21:57 PM)
it is blown, number 1,2,3 cyl be down while number 4 be up and it wont crank over far at all ( by hand of course) the rod is broke, both blocks are 6 bolts. it wasnt beat to death it has 123,000 miles on it. what worries me though is that i need the oil pump off the blown one for the good one, a new oil pump up here cost me over 300 buxx for it and i cant afford that right now. sorry for the confusion the crank case was full of oil and the radiator was full of antifreeze.

TheEngineer -> RE: blown motor (5/5/2007 10:18:19 AM)
i agree with emonz. it does sound to me like a head gasket. Have you done a leakdown test to see if it is the engine? Have you pulled to oil pan to check for shavings or anything?

jdm91hf -> RE: blown motor (5/5/2007 1:54:10 PM)
pulled the pan and the rod is broke, i think the last owner over revved it one to many times, theres no antifreeze or oil in the cylinder,plus when number 1,2,3 cylinders are down dont that mean something broke?, when number 4 is up?

Page: [1]

Return to Mitsubishi Forum home page or view the Full Version of this page.