|
Outie08 -> RE: Detailed Rear Camera Installation (4/28/2008 9:10:53 AM)
|
Hi Cuffy, When I did mine, I share the same concerns about MMCS warranty. I am sure the warranty is void the second you cut and tapped into the MMCS. I was thinking, Instead of cutting the wire right at the connector as per rdenis, what if I create a plug and play connection far away from the MMCS, and is hidden out of the way. I made the connection and put a connector for the camera about 16" away, in that way, all the connections to the MMCS apperas to be in place, And if i have any MMCS problems down the road, I just unplug the camera. btw, I wired the connector so that the second I unplug, the enable line to the MMCS no longer grouded, therefore, MMCS don't even see the camera. I also ran a connection from the Camera to my aux input to cover all my bases in case the service guy wonder about why a camera in my wing. You want to do the right thing when wiring up the camera, i.e, solder you connections, proper fuse for the camera, proper insulation etc. p.s As per rdenis, the factory MMCS connector goes nowhere.
|
|
|
|