|
rdenis -> RE: Open rear-seat DVD system (6/22/2007 8:53:29 AM)
|
Okay great. Here is the next step:
Step 3: Make connections to play DVD on MMCS head unit and have rear DVD also show same
You now need to make two more connections. On the rear of the MMCS head unit is connector C-8 with two wires comings out. One wire is blue which is the VIDEO OUT and the other wire is black/blue which is shielded VIDEO GROUND. You need to connect the blue wire terminal 32 on C-8 to D-16 terminal 35.
D-16 is the connector where your auxiliary plug is noted above. Looking at connector D-16 above, terminals 40 to 36 are from left to right on top and terminals 35 to 31 from left to right on the bottom. In your picture above, the white wire looks to be in terminal 38 and the red wire looks to be below it in terminal 33. Terminals 36 and 31 are on the right side and appear to have the black wire and yellow wire respectively.
The very left of the connector above are the open terminals. Top left is terminal 40 and bottom left is terminal 35. As mentioned, connect the blue wire at terminal 32 on C-8 to the open terminal 35 on D-16. Connect the black/blue wire at terminal 33 on C-8 to the open terminal 40 on D-16.
Once connected do the following test:
Put a DVD into the Head Unit and press play. On the rear entertainment system press the "Source" button until it selects 'Front' and you should now have the same picture on both screens.
|
|
|
|
