Mitsubishi Forums Mitsubishi Forums    
   
Mitsubishi
Mitsubishi Forum   Classifieds   Photo Gallery   Timeslips   Member List   Search   Sponsors   Contact MF
  Mitsubishi Lineup   Mitsubishi News   Recalls   TSBs   Timeslips   Calendars   Register   Login  

GS-T Turbo in a GS

  Printable Version
Mitsubishi >> Tech Help and Information >> Nitrous, Super Chargers, & Turbos >> GS-T Turbo in a GS Page: [1]
Login
Message << Older Topic   Newer Topic >>
GS-T Turbo in a GS - 6/22/2007 5:53:18 PM   
ShadowKing_05


Posts: 4
Joined: 6/22/2007
Status: offline
Hello all I am new here and I would like to ask a possibly already answered question but Unfourtunatly my computer does not let me use the search function on the forum. Perhaps an upgrade is inorder. ANYWHO I have a friend who has a 91 Eclipse Gs Manual and her boyfriend has a 91 Eclipse GS-T.

The Story: I talked with her and she said her boyfriend was going to take the stock system off of his 91 and put it on hers. Now from research and personal experience with turbos I asked him some questions. (She said he was very mechanically inclined) He told me that he is going to change out the cams, ecu, Injectors and put on the turbo. Now here is my questions

1. Does the GS-T have a stronger clutch compared to the GS?
1a. If not would it have to be upgraded? I always have found that on honda's that this is true
2. I've heard that the GS "Oil Squirters" wont be able to stand the heat and stress from the forced induction is this true?
2a. Would the GS-T Squirters have to be put in?
3. Is there a difference in air flow between the GS and GS-T in the cylinder head?
3a. Would there have to be some port matching and boreing going on?
4. Are the intake manifolds the same? I assume yes
5. Would the car run on the 9:1 piston found in the GS? From personal experience that is a rather high compression number when talking about turbos on an old car
6. Are the rods any beefier on the GS-T?
7. Is a fuel rail Upgrade necessary?
8. He says he is going to keep stock exhaust because it can definatly handle the 14psi he is planning on running on her car. Bs right?
9. Do you keep the mass air flow sensor when boosting or will the GS-T ecu not even recognize it?

I asked to help just so I could see him fall on his ass. He is pretty stupid and currently the car is in terrible condition and he is talking about boosting it! He tried to fix the intake and ended putting a giant piece of duct tape over this gash in the intake and neglected to put the filter back on. So my friend has been driving her car for about 2 weeks without a filter and a barely together intake! He aslo says he is not going to use a new timing belt when replacing the cams. He figures he can do this in one day. mmmm I don't think so. I barely managed to put a turbo on my Prelude in one day.

Any comments, suggestions, and answers would be much appreciated to this newb with a prob!
Post #: 1
RE: GS-T Turbo in a GS - 6/22/2007 9:26:43 PM   
Sebba


Posts: 14468
Joined: 2/20/2006
From: San Antonio, TX
Status: online
Sebba's photo gallery
If you would like, i can answer your question individually. Right now im a little antoxicated and to be honest i really cant be bothered.

I see what your asking, and it makes sense and it has/can be done.

Your friend that says it will handle 14psi is wrong..... half it. I personally go by a rule, nothing above 8psi on n/a engines.

I really wouldnt recomend doing this for reliability reasons. I mean, DSMs are unreliable as it is.

My question to you is, why not get a used engine 4G63T 6 bolt  (ebay has plenty) and change out the ECU for a GST ECU and all the sensors needed, and use the exhaust for the GST. It might actually save you time and money in the long run. Turboing a n/a car is very very hit and miss. On an engine with how ever many miles....... it doesnt look good.

Still want me to answer all those questions? Ok, i feel nice and im super bored. Its your lucky day.

1) Im not 100% sure but i believe that they are the same and if not, YES it would have to be changed.
2) The oil squirters will be fine.
3) There IS a difference in the flow in the head in terms of the cams and cam gears. Other than that, no.
4) The intake manifold i am not entirely sure. Dont hold me to it, but im saying yes its the same.
5) It would run yes, for how long who knows. Anything above 8psi i would be nervous... as a matter of fact i would be nervous turboing it anyway
6) The rods are beefier
7) I believe the fuel rail is the same.
8) Yes, BS right there
9) The MAS is the same

Just a wild guess, but are you a chick?

_____________________________


These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you

(in reply to ShadowKing_05)
Post #: 2
RE: GS-T Turbo in a GS - 6/22/2007 9:32:59 PM   
ShadowKing_05


Posts: 4
Joined: 6/22/2007
Status: offline
Sorry buddy no. I am no chick. But this is about my friends car. I myself dont actually own a eclipse. I love the Honda Prelude better. But thank you for the answers. Its my freind's boyfriend that wants to do this and I call him a general retard.

So basically if you are inded right about this He is gonna for sure blow her car up

(in reply to Sebba)
Post #: 3
RE: GS-T Turbo in a GS - 6/22/2007 9:39:36 PM   
Sebba


Posts: 14468
Joined: 2/20/2006
From: San Antonio, TX
Status: online
Sebba's photo gallery
More than likely : )

_____________________________


These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you

(in reply to ShadowKing_05)
Post #: 4
RE: GS-T Turbo in a GS - 6/22/2007 9:43:28 PM   
ShadowKing_05


Posts: 4
Joined: 6/22/2007
Status: offline
That just proves that her boyfriend is an idiot. Like I said he has been running her n/a car without a filter for about 2 weeks

(in reply to Sebba)
Post #: 5
RE: GS-T Turbo in a GS - 6/22/2007 10:25:53 PM   
Sebba


Posts: 14468
Joined: 2/20/2006
From: San Antonio, TX
Status: online
Sebba's photo gallery
You can run a n/a car without a filter.... super efficient.. but not safe

_____________________________


These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you

(in reply to ShadowKing_05)
Post #: 6
RE: GS-T Turbo in a GS - 6/22/2007 10:29:39 PM   
ShadowKing_05


Posts: 4
Joined: 6/22/2007
Status: offline
yeah but its kills the engine when it intakes larger particles. On my prelude I had itb's and after about 2k miles I had to a rebuild just so I could clean verything out

_____________________________

[IMG]http://i98.photobucket.com/albums/l274/ShadowKing_05/l_761e3968837e029be3e427566575991f.jpg[/IMG]

(in reply to Sebba)
Post #: 7
RE: GS-T Turbo in a GS - 6/22/2007 10:34:46 PM   
Sebba


Posts: 14468
Joined: 2/20/2006
From: San Antonio, TX
Status: online
Sebba's photo gallery
I agree

_____________________________


These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you

(in reply to ShadowKing_05)
Post #: 8
RE: GS-T Turbo in a GS - 6/23/2007 8:24:30 AM   
TheAdvocate


Posts: 2321
Joined: 8/18/2005
From: Baraboo, WI
Status: offline
TheAdvocate's photo gallery
I may be wrong, but I thought the N/a Head actually allowed more than the turboed head..


_____________________________



-Project 99 GSX-
Built 6 bolt
Crower rods
ross pistons
Built Head
FP3x Cams
Venom Intake
AEM Fuel Rail
850 Injectors
*Looking for Sponsors*

(in reply to Sebba)
Post #: 9
RE: GS-T Turbo in a GS - 6/29/2007 5:58:50 AM   
RCJr9186



Posts: 5632
Joined: 7/27/2005
From: Summerville, SC
Status: offline
RCJr9186's photo gallery
not as far as i know...   just get a K&N filter and it's basically like having nothing there... or put a screen over the end of it HAHA (no lie, i acutally saw an S2K get about 6whp out of it.)

_____________________________

quote:

Sebba
Use.... the.... FU CKING SEARCH BUTTON.

(in reply to TheAdvocate)
Post #: 10
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Mitsubishi Forum >> Tech Help and Information >> Nitrous, Super Chargers, & Turbos
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
sebba14468
emonz5711432
theengineer10462
rcjr91865632
sanguinius4760
dusty eclips4368
davidmitsusr3360
jpmontero983344
silvercoupe93146
sk8dudety2830

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

Mitsubishi Forum .com is not affiliated with or endorsed by Mitsubishi Motors.