Valve clearance

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

Valve clearance

Printable Version

Mitsubishi >> Mitsubishi Models >> Other Mitsubishi Models >> Valve clearance

Page: [1]

Message

<< Older Topic Newer Topic >>

Valve clearance - 9/5/2007 4:30:03 AM

Margrove

Posts: 2
Joined: 6/10/2007
Status: offline

Hello all,
Could some knowledgeable gurus please enlighten me about the valve clearances on the 4D68 ext R2SB engine?
I have two possibilities but not sure which is right:

0.25mm I
0.35mm E
or
0.15 for both

Grateful thanks
Martin

Post #: 1

RE: Valve clearance - 9/10/2007 4:15:37 AM

1987 TSI

Posts: 37
Joined: 3/7/2007
Status: offline

So I asked around, (not ever had to ask a question about a 4D68 before), but the guy I talked to said that they should both (inlet & Exhaust) should be set at .25mm hot

(in reply to Margrove)

Post #: 2

RE: Valve clearance - 9/10/2007 5:17:09 AM

Margrove

Posts: 2
Joined: 6/10/2007
Status: offline

Ahh, thanks! I think it's a good compromise. Thank you for going to the trouble. It's much appreciated.
Martin

(in reply to 1987 TSI)

Post #: 3

RE: Valve clearance - 9/10/2007 6:02:53 AM

1987 TSI

Posts: 37
Joined: 3/7/2007
Status: offline

no problem