No 5 volts on TPS green/blue wire...

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

No 5 volts on TPS green/blue wire...

Printable Version

Mitsubishi >> Mitsubishi Models >> Mitsubishi Evolution >> No 5 volts on TPS green/blue wire...

Page: [1]

Message

<< Older Topic Newer Topic >>

No 5 volts on TPS green/blue wire... - 3/26/2005 7:57:42 PM

MX6GT

Posts: 1
Joined: 3/26/2005
Status: offline

Hi guys.
I have a 2000 Mitsubishi Technica Evolution with MT and a 1.8 lts. engine.
My car have a real problem. Is supposed to be 5 volts in the green/blue wire on the TPS, MAF and in the IAC. I replace the ECU and the problem still the same. I read the ECU codes with my Snap on 2500 Scanner and the codes are: TPS and Baro Sensor. I realized a various tests using a Snap on Vantage to this sensors and the sensors are good.
I check all the ECU and chassis grounds and everything is OK.

Any professional help?
I will appreciate it.
Thanks.

Post #: 1

RE: No 5 volts on TPS green/blue wire... - 4/8/2005 4:15:26 PM

wicked_outlander

Posts: 1383
Joined: 12/11/2004
Status: offline

tough one, we dont even have technica evo here......yet.

_____________________________

Bee☆Racing 　 Bee☆R　GARAGE
Ｎ１耐久レース参戦ＧＴＯのメンテナンスとタイヤ交換

横浜に移転　
ドラッグレース参戦

(in reply to MX6GT)

Post #: 2