Mitsubishi Forums Mitsubishi Forums    
   
Mitsubishi
Mitsubishi Forum   Classifieds   Photo Gallery   Timeslips   Member List   Search   Sponsors   Contact MF
  Mitsubishi Lineup   Mitsubishi News   Recalls   TSBs   Timeslips   Calendars   Register   Login  

stock BOV trick

  Printable Version
Mitsubishi Forums >> Tech Help and Information >> Everything else >> stock BOV trick Page: [1]
Login
Message << Older Topic   Newer Topic >>
stock BOV trick - 10/15/2007 2:54:15 PM   
undercovertrick

 

Posts: 3
Joined: 10/2/2007
Status: offline
I have a 97 gst spyder. A friend once told me there was a way to make the stock BOV work like an aftermarket one w/ the sound and stuff. He said to remove the hose that goes from the BOV to the intake and then seal the hole on the intake. When i tried this, it does work and sounds amazing. But when i took it for a drive, it would loose boost at 3000 rpm and pretty much die down. Has anyone ever heard of this trick, and if so, do you know why it does this and if its possible to make work w/out puttin money into it? i love the sound it makes...but maybe the spring in the BOV is to weak and causes it to leak at 3000 rpm...idk. but if you have answers, please help! thanks.
Post #: 1
RE: stock BOV trick - 10/15/2007 3:25:38 PM   
Sebba


Posts: 14725
Joined: 2/20/2006
From: San Antonio, TX
Status: offline
Sebba's photo gallery
Yes i have heard of it. I will tell you right now to never listen to anything this person tells you again. Do a little search for "venting" and you will see why its bad. There is a write up on here about it i believe.

Heres why: You see that little black box that is in front of the intake tube? That is what determines how much air is going to be entered into the intake. Now, it thinks that that tube is always connected, so it expects that little extra amount of air to be there. When its not, you get not enough air, an too much fuel = running rich. This will cause stumbling, crappy shifts, and perhaps dieing at stop lights.

Do yourself a favor, slap your friend, and stick around here : )

By the way, the stock blow off valve is a piece of **** anyways. My advice is to buy a Greddy Type RS + a recirculation kit.

_____________________________


These cranks are made for walkin'''', and thats just what they''''ll do, one of these days these cranks are gonna walk all over you

(in reply to undercovertrick)
Post #: 2
RE: stock BOV trick - 10/15/2007 3:28:27 PM   
undercovertrick

 

Posts: 3
Joined: 10/2/2007
Status: offline
haha. yeah that makes sense. thanks.

(in reply to undercovertrick)
Post #: 3
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Mitsubishi Forums >> Tech Help and Information >> Everything else
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
sebba14725
emonz5711693
theengineer10734
rcjr91865638
sanguinius4762
dusty eclips4387
jpmontero983425
silvercoupe93409
davidmitsusr3360
dsm1990gsx2954

New Vendors
AMSOIL - Performance Oil Technology

Mitsubishi Forum .com is not affiliated with or endorsed by Mitsubishi Motors.