|
Lil Evo -> RE: radio (11/2/2007 6:02:22 PM)
|
go to best buy, circuit city, hh gregg, etc and pick up a 95+ Mitsubishi harness, and a reverse harness that will fit it. Wire in the reverse harness to what's been mutilated, the other to the wiring that comes with your new radio. Wire colors on the reverse harness should be as follows:
Yellow 12v Constant
Red 12v Accessory
Black Ground (my harness did not have a ground, so if this is the case, you can go to any of the metal braces behind the dash. Just make sure it's securley fastened and that there is no paint, just bare metal.)
White Front Left (+)
Whte/Black Front Left (-)
Grey Front Right (+)
Grey/Blcak Front Right (-)
Green Rear Left (+)
Green/Black Rear Left (-)
Purple Rear Right (+)
Purple/Black Rear Right (-)
Blue/White 12v Acc Amp turn on
Orange & Illumination wires are Orange and Orange/White, but unless you've got a deck with a built in night time dimmer, you won't need these.
|
|
|
|
