RE: help me please, newbee
Login  | |
|
RE: help me please, newbee - 12/5/2007 3:45:35 PM
|
|
|
TheAdvocate
Posts: 2321
Joined: 8/18/2005
From: Baraboo, WI
Status: offline
|
ya, the motor mount on the drivers side would be different and prolly wouldnt fit.. Along with other accessories on the motor.. If its a 6 bolt there are certain parts that you need to fit it.
Have your mechanic check the flywheel and see if there are 6 bolts holding it or 7 bolts.. That will be a big thing!
After looking at those pictures better It really looks like a 6 bolt motor...
< Message edited by TheAdvocate -- 12/5/2007 3:49:29 PM >
_____________________________
-Project 99 GSX-
Built 6 bolt
Crower rods
ross pistons
Built Head
FP3x Cams
Venom Intake
AEM Fuel Rail
850 Injectors
*Looking for Sponsors*
|
|
|
|
|
|
|
|
|
RE: help me please, newbee - 12/5/2007 3:54:16 PM
|
|
|
TheAdvocate
Posts: 2321
Joined: 8/18/2005
From: Baraboo, WI
Status: offline
|
If it is in fact a 6 bolt motor here is a list for ya, of the things your mechanic will need..
Parts List
· 1G CAS (91-92 Optical Effect, 93-94 Hall Effect)
· 1G Oil Cooler (90-92 MD 157670 6bolt water cooled oil cooler)
· 1G Water Pump
· 1G Oil Pump/Front Case
· 1G Timing Belt necessities
· 2G Engine mount (modified) use 2G engine mount trimmed, with 1G tensioner arm
· 1G Timing Belt Covers (modified)
· 1G 90-92 6-bolt block (with whatever internals)
· 1G 6-bolt Flywheel
· 2G Starter Mounting bracket
· 1G Water Pipe
· 1G lower radiator hose
· 1G Thermostat housing/ Water Neck
· 1G 6-bolt oil pan Balance shafts (remove them or keep em, its up to you, we take them out)
· 2G Alternator
· 2G Power Steering Pump
· 2G A/C 2G Belts
_____________________________
-Project 99 GSX-
Built 6 bolt
Crower rods
ross pistons
Built Head
FP3x Cams
Venom Intake
AEM Fuel Rail
850 Injectors
*Looking for Sponsors*
|
|
|
|
|
Printable Version
