|
Sheijin -> RE: 2g heater control unit (2/27/2008 5:34:30 PM)
|
If you're talking about the controls, then it's quite difficult.
First take out the vents above the controls by popping them out.
then you'll have to pull out 3-4 control sliders that hook to:
The hot/cold air switches
the Direction switches (Defrost, feet, feet/face, or face, etc)
and the switch that controls recirculation air or outside air.
then unhook the various wire clips.
You'll probably need some needle nose pliars to pull of the control sliders for the doors.
|
|
|
|
