60-1 trim turbo? (Full Version)

Mitsubishi Forum >> Tech Help and Information >> Nitrous, Super Chargers, & Turbos

60-1 trim turbo?

  

newguy2007 -> 60-1 trim turbo? (1/13/2008 7:42:32 PM)

What exactly is the 60-1 trim turbo? In size? Ive heard about 16g and 20g and now 50 trim and all different measurments. I have the 60-1 trim in my car and it spools up pretty nice.

Also, i was just wondering about a hp estimate for my car. I think im going to get it dynoed pretty soon but until then:  97 eclipse gst spyder

650 cc fuel injectors
bigger fuel pump(?)
FMIC
greddy bov
wastegate
60-1 trim turbo
safc II
hks valve controller
running 25 psi boost
turbo timer
full 3" exhaust
running 93 octane fuel
manual (brand new clutch friday)

I think thats about it.

  
Sebba -> RE: 60-1 trim turbo? (1/13/2008 8:17:23 PM)

That turbo is actually pretty massive. Its bigger than a 50 trim. Its about the equivilant to a 30R. Basically a 500hp capable turbo.

Total overkill with your mods

newguy2007 -> RE: 60-1 trim turbo? (1/13/2008 8:23:33 PM)

as long as it still spools up nice does it matter?

TheEngineer -> RE: 60-1 trim turbo? (1/14/2008 5:47:06 AM)

You do have a wideband also right. Make sure your running a good A/F ratio. And i think at that PSI your really pushing the limits of that SAFC. You might want to think about upgrading to DSMlink or something. I would turn that boost down a bit to like 20 until your sure your running at a safe a/f.

But for an estimate its hard to say because the tune will really change it. If i had to guess id say no more than 320 only because of the safc. Its definetly capable of the 400hp+ though

Sebba -> RE: 60-1 trim turbo? (1/14/2008 10:18:04 AM)

If you are okay with it... then its just fine.

However, you can get the same power from a much smaller turbo, and you will have better spool.

TheAdvocate -> RE: 60-1 trim turbo? (1/14/2008 4:52:33 PM)

Im suprised your motor is handling that size of turbo at 25 psi...   Should be pretty quick though..

TheEngineer -> RE: 60-1 trim turbo? (1/14/2008 5:24:50 PM)

thats what im wondering advocate. Especially only on an SAFC. It doesnt add up to me.

Sebba -> RE: 60-1 trim turbo? (1/14/2008 8:00:16 PM)

I bet its knocking like a ****

newguy2007 -> RE: 60-1 trim turbo? (1/14/2008 8:07:02 PM)

someone else told me this too. I will check the psi tommorrow and try to turn it down to about 20.(once i figure out how to use the ****ing hks)

jlh077464 -> RE: 60-1 trim turbo? (1/14/2008 8:08:58 PM)

So did you have a wideband?

  

Page: [1] 2   next >   >>

Return to Mitsubishi Forum home page or view the Full Version of this page.