Looking for some answers

Printable Version

Mitsubishi Forums >> General Mitsubishi Forums >> General Mitsubishi Chat >> Looking for some answers

Page: [1]

Login Message << Older Topic   Newer Topic >>

Looking for some answers - 1/22/2008 9:33:11 AM    Talinkitsune   Posts: 62 Joined: 1/22/2008 From: Cokato, MN Status: offline I just bought an Eagle Talon Tsi. Well you can say it's not in the best of condition lol I got a few questions. First off I only saw one really big body problem, the back wheel well is rusted straight through and is showing in the inside of the trunk area. How would i go about fixing that **** ? lol second. Im looking for a cheap 420a with 5 speed transmission, or a fairly cheap 420a rebuild kit. Know of any? leave me a message or something or email me at Talinkitsune1@yahoo.com   THX A TON Post #: 1

RE: Looking for some answers - 1/22/2008 1:02:19 PM    sk8dudety Posts: 2911 Joined: 7/17/2005 Status: offline wait, if you have a talon TSI, then why do you need a 420a motor? and you need to patch or have the wheel well patched, and undercoated _____________________________ http://www.cardomain.com/ride/2937397/1 '95 GSX BOO YA! Tyler Miller "NO REPLACEMENT FOR DISPLACEMENT MY A$$!" (in reply to Talinkitsune) Post #: 2

RE: Looking for some answers - 1/22/2008 2:02:14 PM    Talinkitsune   Posts: 62 Joined: 1/22/2008 From: Cokato, MN Status: offline Unless i was informed wrong isnt 420a the stock motor? if now could you tell me what it is lol :P THX (in reply to sk8dudety) Post #: 3

RE: Looking for some answers - 1/22/2008 2:49:43 PM    bestwiseguy Posts: 1406 Joined: 3/25/2007 Status: offline If you have the tsi then the stock motor is the 4g63.  Is your car turbocharged or N/A? _____________________________ ****ing DSM 99 GST Mods: Apexi N1 Exhaust w/testpipe Act 2100 lb clutch (Failed on an epic level) Fidanza flywheel (in reply to Talinkitsune) Post #: 4

RE: Looking for some answers - 1/22/2008 3:41:31 PM    dsm1990gsx Posts: 2954 Joined: 10/22/2007 Status: offline Well you gonna have to cut out all the rust and overlay a sheet of metal in its place, is there rust anywhere else on the car?  Check the strut towers under the hood, there are know for rotting out. As for the engine, if it a tsi it should be a 4g63. _____________________________ 2003 Ford Escape old ladys car 1990 Tsi Awd daily driver 2007 Jeep Wrangler power wheels daughters car...soon to be converted from 12v to 24v (in reply to bestwiseguy) Post #: 5

RE: Looking for some answers - 1/22/2008 4:28:43 PM    Rob Posts: 867 Joined: 1/1/2008 From: VT Status: offline *awaiting turbo or n/a response. _____________________________ Rob/03 RR Lancer Evolution VIII (in reply to dsm1990gsx) Post #: 6

RE: Looking for some answers - 1/22/2008 7:11:57 PM    Talinkitsune   Posts: 62 Joined: 1/22/2008 From: Cokato, MN Status: offline N/A on the turbo So what kind of weld if any should i use? (in reply to Rob) Post #: 7

RE: Looking for some answers - 1/22/2008 7:14:09 PM    Talinkitsune   Posts: 62 Joined: 1/22/2008 From: Cokato, MN Status: offline The only rust i really found was right abouve the rear wheel wells and obviously under the car, but im less worried about that (in reply to Talinkitsune) Post #: 8

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mitsubishi Prices

Mitsubishi Vehicles
3000GT Lancer
Diamante Zinger
Eclipse Outlander
Endeavor Raider
Galant Lancer Evo

Top 10 Posters
sebba 14721 emonz57 11661 theengineer 10721 rcjr9186 5635 sanguinius 4762 dusty eclips 4385 jpmontero98 3415 silvercoupe9 3397 davidmitsusr 3360 dsm1990gsx 2954

New Vendors
AMSOIL - Performance Oil Technology