RE: boosting way too much!!!!!!!

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

RE: boosting way too much!!!!!!!

Printable Version

Mitsubishi >> Tech Help and Information >> Nitrous, Super Chargers, & Turbos >> RE: boosting way too much!!!!!!!

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: boosting way too much!!!!!!! - 1/31/2008 3:39:37 PM

TheAdvocate

Posts: 2321
Joined: 8/18/2005
From: Baraboo, WI
Status: offline

If its choking at 18 psi, it may be b/c the fuel setup isnt good enough.. So if the other one is reading 30 psi, then that gauge is wrong, b/c it would start to get fuel cut...

_____________________________

-Project 99 GSX-
Built 6 bolt
Crower rods
ross pistons
Built Head
FP3x Cams
Venom Intake
AEM Fuel Rail
850 Injectors
*Looking for Sponsors*

(in reply to TheEngineer)

Post #: 11

RE: boosting way too much!!!!!!! - 1/31/2008 6:57:44 PM

lhausi2

Posts: 698
Joined: 11/5/2007
Status: offline

alright tonight i switched the vacuum lines to the way they were be4(which is hella wrong, but seemed to work when i 1st got the car), and once it hits 1 bar it felt like it just started spooling, before that it didn't pull. and now it still goes to 1.5 bars, but way later, say around 5000/6000 rpm's. and once it hits 1.5 bars it just chokes

(in reply to TheAdvocate)

Post #: 12

RE: boosting way too much!!!!!!! - 2/1/2008 6:37:51 AM

TheEngineer

Posts: 10458
Joined: 1/25/2006
Status: offline

something must just be wrong in the setup. I just created a FAQ on the vacuum lines. Check out the normal for a 2g and see if your is exactly like this
http://www.mitsubishiforum.com/m_204000/mpage_1/key_/tm.htm#204000

_____________________________