Will this 18" sub work with my amp?
Login  | |
|
Will this 18" sub work with my amp? - 1/30/2008 12:35:15 PM
|
|
|
blue450yo
Posts: 18
Joined: 1/9/2008
Status: offline
|
I have a 1000watt sony amp. What I want to know is if the sub I want will work fine with no troubles. Just want to run the 1 sub.
SAYS
SONY XM1652Z 1,000 WATT 2 CHANNEL BRIDGEABLE CAR AMPLIFIER
Description
THE SONY XM-1652Z 1,000 WATT 2 CHANNEL MAX CAR AMPLIFIER COMBINES POWER, EFFICIENCY, AND THE GREATEST FEATURES INTO A BEAUTIFUL DESIGN.
THIS AMP IS PERFECT TO POWER YOUR SUBS OR INTERIOR SPEAKERS. IT CAN BE BRIDGED TO 1 CHANNEL MONO MODE AND RUN ONE SUB WITH 1,000 WATTS POWER, OR RUN IN 2 CHANNEL STEREO MODE AND RUN 500 x 2. YOU CAN EVEN SPLIT IT INTO 4 CHANNELS IF YOU WANT TO POWER 4 SPEAKERS.
Features:
500 watts x 2 channels
1,000 Watts Total Output
low-pass crossover (50-300 Hz, 12 dB/octave)
variable bass boost (0-10 dB at 40 Hz)
Tri-way capable
15-3/4"W x 2-3/16"H x 10-7/8"D
stereo 2 channel or bridged mono output
4-ohm stable when bridged
Tri-way capable
MOSfET power supply
preamp and speaker level inputs
preamp outputs
gold-plated connectors
WILL IT WORK WITH THIS SUB?
SAYS
This is a brand new single, factory sealed, never been opened Acoustic high performance subwoofer. When you need a high power 18” sub for the competition rounds, this is the one! It’ll handle up to 1000 watts of rock solid pounding bass all day long! This is from Acoustic’s new B.A.S.S. (Bad *** Serious Sub) line of subwoofers. This sub is designed to play loud and win competitions. It features a 4 ohm 2” Parabolic RFL voice coil for 40% more power handling capabilities, a 60 oz. magnet, an oversized rubber surround, and a Poly Zirconium cone for 25% tighter and punchier bass. Because of the “Mid Q” design, you can use a ported or sealed box. It also has CEA Cooling Technology with a vented and extended pole piece to disburse voice coil heat and increase reliability. Designed and engineered in the USA. We are an authorized Acoustic B.A.S.S. Internet dealer. This comes with a full 3 year warranty. WARNING: This sub is capable of producing dangerously loud SPL levels.
Acoustic 18” High Performance Subwoofer
Designed and Engineered in USA
Power Handling Capabilities:
500 Watts RMS to 1000 Watts Maximum
Recommended Power:
60 Watts to 1000 Watts
2” Parabolic RFL Voice Coil
60 oz. Magnet
Oversized Rubber Surround
4 Ohm Impedance
Poly Zirconium Cone
Efficiency / Sensitivity 94dB @ 1 Watt / 1 Meter
Polyimide Voice Coil Former
Mid Q Design for Versatility in Enclosure Compatibility
Flat Progressive Roll Spider
CEA Cooling Technology
Vented and Extended Pole Piece
Low Carbon Top and Bottom Plate
Weather Resistant Design
Approved for Car Audio and Marine Use
3 Year Warranty
|
|
|
|
|
|
|
RE: Will this 18" sub work with my amp? - 1/30/2008 9:11:21 PM
|
|
|
Scubba.steve
Posts: 175
Joined: 1/14/2008
Status: offline
|
Yea it will work, i wouldnt bridge it though. If you do, dont run it full blast. You would be pushing 1000 watts to it. Recommended is 500 on the sub hince 500 Rmsgb
_____________________________
140 HP @ 6000 Rpm 133 (lb-ft) Torque @ 4800 Rpm
Horsepower is how hard you hit the wall, torque is how much of the wall you take with you
|
|
|
|
|
RE: Will this 18" sub work with my amp? - 1/30/2008 9:20:38 PM
|
|
|
Dusty Eclipse
Posts: 4353
Joined: 2/23/2007
From: 11746,21114,34668
Status: offline
|
Who in the sweaty hell would make a 18" subwoofer that is only rated at 1kW? What brand is that?
_____________________________
Current cars: (What I havent wrecked)
1995 Eagle Talon TSi "Jackie"
2001 Mitsu. Eclipse GT "Dusty"
2000 Volvo V70R AWD "Mindy"
|
|
|
|
|
|
|
RE: Will this 18" sub work with my amp? - 1/31/2008 12:09:18 PM
|
|
|
Dusty Eclipse
Posts: 4353
Joined: 2/23/2007
From: 11746,21114,34668
Status: offline
|
I wouldnt waste my money on that if I were you.
_____________________________
Current cars: (What I havent wrecked)
1995 Eagle Talon TSi "Jackie"
2001 Mitsu. Eclipse GT "Dusty"
2000 Volvo V70R AWD "Mindy"
|
|
|
|
|
RE: Will this 18" sub work with my amp? - 1/31/2008 3:58:36 PM
|
|
|
bestwiseguy
Posts: 1408
Joined: 3/25/2007
Status: offline
|
buy a 13.5 inch w7. their only around $600 a sub lol.
_____________________________
****ing DSM
99 GST
Mods:
Apexi N1 Exhaust w/testpipe
Act 2100 lb clutch (Failed on an epic level)
Fidanza flywheel
|
|
|
|
|
RE: Will this 18" sub work with my amp? - 1/31/2008 7:21:49 PM
|
|
|
shreff99
Posts: 1162
Joined: 9/22/2005
From: Franklin, PA
Status: online
|
Also, what are you powering the system with?? You would probably need to beef up your power source too..I would think you should get a Stinger dry cell battery, capacitors, beefier alternator, alternator relay, a line driver wouldn't be a bad idea either....DON'T GO WITH E-BAY JUNK!! SAVE YOUR MONEY AND DO IT RIGHT! Here's what my system is and I'm hittin' well into the 152 DB's with the gains on my "sub amp" turned only a quarter of the way up;
Shreffy's Stereo System:
2 Earthquake Magma 12 inch subs, 6 1/2 inch Earthquake mids in the doors, 3 1/2 inch Earthquake tweeters w/crossovers in the dash, Earthquake 6x9's in rear, Pioneer 6600 head unit with screen savers, Earthquake DHC 200 digital amp for subs, Earthquake 4 channel amp for highs, Audio Control line driver in console, American Eagle capacitor, Stinger dry cell battery in trunk, Stinger fans to cool amps, Pro Power 210 amp alternator, Stinger alternator relay under the hood, all Stinger wiring and RCA's, custom vented and ported enclosure made from 3/4 inch MDF custom made in the trunk to fit it perfectly.
< Message edited by shreff99 -- 1/31/2008 7:28:14 PM >
_____________________________
1999 Eclipse GS-T..Some mods and a lot more to come..Pimpin' Ain't Easy, but it's necessary.
|
|
|
|
|
Printable Version
