parts installation instructions (Full Version)

Mitsubishi >> Mitsubishi Models >> Mitsubishi Evolution

parts installation instructions

  

myevobaby -> parts installation instructions (2/1/2008 9:51:50 AM)

anybody here knows how to install a boost gauge and boost control for Evo IX SE. post it here please or e-mail me at kolokoy2@netzero.net. aight! good day to all mitsubishi lovers!

  
EMonz57 -> RE: parts installation instructions (2/1/2008 10:43:56 AM)

what kind of gauge , what kind of controller

Rob -> RE: parts installation instructions (2/1/2008 1:09:00 PM)

Boost gauge: http://evomoto.com/tech_info.php?tPath=9&tech_id=14&osCsid=ddc4b68f11c273a44edd74ef8a5ee2c2

MBC install: http://www.jscspeed.com/evo/evo_base.html?/rides/project_evo/mbc.htm

EBC install: http://www.evomoto.com/tech_info.php?tPath=3_5&tech_id=23

Evo2nv -> RE: parts installation instructions (2/1/2008 1:40:32 PM)

I heard that running your boost gauge line off ur fuel pressue regulator sensor was bad cause if that hose were to ever come off you either run really rich or lean depending on whether or not u were under boost. just what i heard , i've heard some people tap off of there bov line.

EMonz57 -> RE: parts installation instructions (2/1/2008 3:02:37 PM)

I have the AEM tru boost so mine needs a line to feed in for the gauge and the soliniod.  I Tee off of the FPR for the soliniod and the BOV for the gauge

myevobaby -> RE: parts installation instructions (2/4/2008 3:35:02 PM)

thanks a lot for these helpful information about how to install boost gauges and boost control. now, I am ready to buy these parts and install them on. again, thank you ! to all mitsubishi lovers, enjoy your ride!

myevobaby -> RE: parts installation instructions (2/4/2008 3:36:59 PM)

GREDDY boost gauges and boost controller.

  

Page: [1]

Return to Mitsubishi Forum home page or view the Full Version of this page.