|
chenarm -> RE: Heated Mirrors (2/5/2008 6:28:41 AM)
|
BTW, removing the mirror is a 2 minutes job, and all you need ti a flat-tip screwdriver. 1.Slant the mirror upward with your hands. Then insert a flat-tipped screwdriver wrapped with protective tape between the pivot plate and mirror through the cut-out from behind the mirror. Now pry off the mirror tab and release the lower side of the mirror as shown in the illustration. 2.Release the upper side of the mirror from the tab as shown while pulling out the mirror. 3.Disconnect the connectors of the heated mirror.
|
|
|
|