umm some questionssssssssssssss (Full Version)

Mitsubishi Forum >> Tech Help and Information >> Internal Lounge

umm some questionssssssssssssss

  

snoood -> umm some questionssssssssssssss (4/7/2008 12:18:33 AM)

Im nt sure if these questions go here but ill ask anyway...

1. U know th front part of the 2003 lancer sedan, and u know how just under th bonnet theres those plasticy things? [image]http://images.automotive.com/stock/300/MITSUBISHI/LANCER/2003/4SA.JPG[/image] seee? Well does anyone know how to get rid of that?

2. Has anyone tried changing the colour of their interior, such as dash. door, etc? Telll meeeee howwwwwww! my friend just uses paint, but i think it just scratches off, has anyone experienced that?

Thanks for ur help

  
Rob -> RE: umm some questionssssssssssssss (4/7/2008 1:58:30 AM)

Proper punctuation and grammar, should yield better results.

TheEngineer -> RE: umm some questionssssssssssssss (4/7/2008 6:27:33 AM)

Im not sure about the front bumper but you can use simple spray paint on the dash as long as you do it right. Here are the proper steps.

1. Sand down peices that you plan on painting to make a nice smooth and clean surface.
2. Spray at least to coats of primer or until your satified that you have a nice smooth coat over the piece.
3. Spray a few coats of the colored paint that your using. Again until your satisfied that its nice and even and that you cant see any primer though it.
4. Spray a few coats of clear coat over it.

When i did mine i used duplicolor paint which worked pretty well. You can get it at any parts store. Also make sure you do this either outside or not in a living area as the fumes will be pretty strong. The clear coat is key to preventing any chipping

PoolhallJunkie777 -> RE: umm some questionssssssssssssss (4/8/2008 6:52:11 PM)

after trying to read that, my first thought was, why is this thread in this section. i thought i was going to read something useful. 

ridingDSM0201 -> RE: umm some questionssssssssssssss (6/26/2008 6:27:19 PM)

use the vynal paint no need for primer and it flexes. lightly sand to rough up the surface and make sure theres no armor all on it. three coats and your good. wont peal either

  

Page: [1]

Return to Mitsubishi Forum home page or view the Full Version of this page.