20hp speed chip?

Printable Version

Mitsubishi >> Tech Help and Information >> Nitrous, Super Chargers, & Turbos >> 20hp speed chip?

Page: [1]

Login Message << Older Topic   Newer Topic >>

20hp speed chip? - 6/27/2005 3:14:44 PM    toneee   Posts: 2 Joined: 6/27/2005 Status: offline ive heard/read about it on ebay and other places... does it really work? Post #: 1

RE: 20hp speed chip? - 6/27/2005 6:49:54 PM    bjsstang05   Posts: 36 Joined: 5/20/2005 Status: offline depends on what kind of chip it is. ive seen as much as 30HP on some applications. brandon _____________________________ 1984 dodge ram 50 (2.0L) d50 block bored .20 over and honed forged everything on bottom 1st gen dsm turbo head twin aftermarket cams aftermaket intake manifold 660 fj, aem fuel rails garrett turbocharger running 20lbs of boost with N2O (in reply to toneee) Post #: 2

RE: 20hp speed chip? - 8/20/2005 6:12:10 PM    TheAdvocate Posts: 2321 Joined: 8/18/2005 From: Baraboo, WI Status: offline What would it depend on? What brands are there out there that would make that big of a difference? How pricey are they? (in reply to bjsstang05) Post #: 3

RE: 20hp speed chip? - 8/20/2005 9:20:07 PM    bjsstang05   Posts: 36 Joined: 5/20/2005 Status: offline well i see alot of v8 chips but no 4-6 cylinder chips :( but with air intake, aftermaket exhaust sytem and maybe a intake manifold you get the extra 30 to 40HP ill look it up for you. brandon _____________________________ 1984 dodge ram 50 (2.0L) d50 block bored .20 over and honed forged everything on bottom 1st gen dsm turbo head twin aftermarket cams aftermaket intake manifold 660 fj, aem fuel rails garrett turbocharger running 20lbs of boost with N2O (in reply to toneee) Post #: 4

RE: 20hp speed chip? - 8/21/2005 12:38:22 AM    TheAdvocate Posts: 2321 Joined: 8/18/2005 From: Baraboo, WI Status: offline Thanks. Im looking to get little hp add ons right now.. Just curious on things like that. (in reply to bjsstang05) Post #: 5

RE: 20hp speed chip? - 8/21/2005 3:34:18 AM    soloRider   Posts: 42 Joined: 8/12/2005 Status: offline its a fake and a rip dont get some ebay special chip thats something extreamly important on ur ride man if it was an intake or a cat back that cant really be screwed up besides crappy metal and wrongly bent pipe's stick with the intake and the exauhst system for now man....... better yet get a new UDP (under drive pully aka crank) its been said u get the most gain for ur dollar that way (in reply to TheAdvocate) Post #: 6

RE: 20hp speed chip? - 8/21/2005 6:17:17 PM    99clipsgst Posts: 347 Joined: 12/4/2004 Status: offline Yeah those ebay chips are just 2000 ohm resistors that shorts the sensor and changes the air fuel ratio. So unless its a venom or dmslink stay with the simple mechanical upgrades. _____________________________ Boost. the only replacement for displacement. God created turbo lag to give V-8's a chance. (in reply to soloRider) Post #: 7

RE: 20hp speed chip? - 8/23/2005 4:09:18 PM    bjsstang05   Posts: 36 Joined: 5/20/2005 Status: offline ya i was thinking venom or something like that. id get an MSD ingintion system for better computer performance, as well as better spark. i hear this new sytem F.A.S.T (fuel, air, spark, technology) is a really powerful system. heres the website if anyones intrested..... http://www.fuelairspark.com/ brandon PS hope this helps i havent had time to look up anything else (work, school, etc) _____________________________ 1984 dodge ram 50 (2.0L) d50 block bored .20 over and honed forged everything on bottom 1st gen dsm turbo head twin aftermarket cams aftermaket intake manifold 660 fj, aem fuel rails garrett turbocharger running 20lbs of boost with N2O (in reply to toneee) Post #: 8

RE: 20hp speed chip? - 8/23/2005 6:10:55 PM    Patrick Posts: 1194 Joined: 3/17/2005 Status: offline those 20 dollars chips are garbage...dont waste your time or money on them. _____________________________ (in reply to bjsstang05) Post #: 9

RE: 20hp speed chip? - 8/24/2005 1:51:03 PM    bjsstang05   Posts: 36 Joined: 5/20/2005 Status: offline just get a dyno run and let them give you a chip. they will tell you where your shift points are(manual) and what you need to do in order to make hp/tq with your car. brandon _____________________________ 1984 dodge ram 50 (2.0L) d50 block bored .20 over and honed forged everything on bottom 1st gen dsm turbo head twin aftermarket cams aftermaket intake manifold 660 fj, aem fuel rails garrett turbocharger running 20lbs of boost with N2O (in reply to toneee) Post #: 10

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mitsubishi Prices

Mitsubishi Vehicles
3000GT Lancer
Diamante Zinger
Eclipse Outlander
Endeavor Raider
Galant Lancer Evo

Top 10 Posters
sebba 14468 emonz57 11432 theengineer 10462 rcjr9186 5632 sanguinius 4760 dusty eclips 4368 davidmitsusr 3360 jpmontero98 3344 silvercoupe9 3146 sk8dudety 2830

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.