03 Galant Issues - Dire need of help!

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

03 Galant Issues - Dire need of help!

Printable Version

Mitsubishi >> Tech Help and Information >> Everything else >> 03 Galant Issues - Dire need of help!

Page: [1]

Message

<< Older Topic Newer Topic >>

03 Galant Issues - Dire need of help! - 7/10/2005 2:48:36 PM

Joeyp2100

Posts: 4
Joined: 7/10/2005
Status: offline

I have an 03 Galant ES 2.4 w/ 14k miles. Recently - Within the last 2-3 months my car will die when I come to a stop. Let me explain a little more:
I will be driving down the road (35-50mph) w/ the A/C on and stereo on. Everything will run fine for a couple of miles. However, after those couple of miles and I need to come to a stop at a red light or what not, the RPMS will drop to around 100-200 and bounce in that area. This will cause the car to die and I now have to put the car in Park and Start it back up. It will start back up w/ no problems and go for another mile or so before it does it again. It wont do this at every light or every stop but in a 5-10 mile drive w/ 4-5 stop It will die 2-3 times. Ive come to find out that if I can see a stop coming up and I put the car in Neutral it reduces the chance of dieing but wont always work. In that same 5-10 mile drive It will die 1-2 times. I can keep it from dieing at all if I put it in N and give it a little bit of gas. All of my fuses are good, Fluids are good etc.... Any Ideas - I cant have this happen to many more times before something Bad happens!

Also, About 6 months ago I had my OEM deck stolen out of the car, However instead of unplugging it from the back of the deck, they cut it. So I went out and bought a new deck and had a friend wire it. Well After many failed attempts he got the unit to work, However every since then my Speed-O and Odometer wont work. Any ideas as to what I can do as far as possibly getting an OEM harness and plugging it back in to a Aftermarket and into the deck? or possibly a Wire Diagram for those wires that I can possibly get the gauges and deck to work? Thanks.

Thanks in advance for anyhelp and/or Ideas.