Motor mount (Full Version)

Mitsubishi >> Tech Help and Information >> PCM & Fuel Systems

Motor mount

  

Jre56 -> Motor mount (6/25/2008 6:05:10 AM)

How diffilcult is it to change the top,driver side motor mount on my 1998 GST eclipse.The rubber is chewed up.

  
Sebba -> RE: Motor mount (6/25/2008 11:31:45 AM)

Depends what equipment you have. Engine hoist? Jack?

Jre56 -> RE: Motor mount (6/25/2008 3:22:07 PM)

I have a floor jack.

Sebba -> RE: Motor mount (6/25/2008 4:02:01 PM)

Its going to be hard. You need to put the jack under the engine, remove the mount bolts, raise it up a little.. and change it.

Jre56 -> RE: Motor mount (6/25/2008 4:48:12 PM)

Is there anywhere I can buy the inserts and have them pressed in instead of replacing the entire mount?

Sebba -> RE: Motor mount (6/25/2008 6:44:37 PM)

Yeah thats what I meant, my bad.

Jre56 -> RE: Motor mount (6/25/2008 8:06:53 PM)

Ok, thanks for your help! Do you know if any of the newer model''s(2004-2007) use the same mount? Maybe I can go to a junkyard and buy one that''s already off.

Sebba -> RE: Motor mount (6/25/2008 9:18:17 PM)

No

sk8dudety -> RE: Motor mount (7/2/2008 5:15:22 AM)

yea you can definitely get the new inserts put in, but if i were you i''d replace all four of ''em while it was up in the air, that way instead of having only one urethane piece and having it be all awkward it''d feel a lot better for you. besides you have to buy it all in a kit anyway lol

  

Page: [1]

Return to Mitsubishi Forum home page or view the Full Version of this page.