Motor mount

Printable Version

Mitsubishi Forums >> Tech Help and Information >> PCM & Fuel Systems >> Motor mount

Page: [1]

Login Message << Older Topic   Newer Topic >>

Motor mount - 6/25/2008 6:05:10 AM    Jre56   Posts: 7 Joined: 6/18/2008 Status: offline How diffilcult is it to change the top,driver side motor mount on my 1998 GST eclipse.The rubber is chewed up. < Message edited by Jre56 -- 6/25/2008 6:14:47 AM > Post #: 1

RE: Motor mount - 6/25/2008 11:31:45 AM    Sebba Posts: 14467 Joined: 2/20/2006 From: San Antonio, TX Status: offline Depends what equipment you have. Engine hoist? Jack? _____________________________ These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you (in reply to Jre56) Post #: 2

RE: Motor mount - 6/25/2008 3:22:07 PM    Jre56   Posts: 7 Joined: 6/18/2008 Status: offline I have a floor jack. (in reply to Jre56) Post #: 3

RE: Motor mount - 6/25/2008 4:02:01 PM    Sebba Posts: 14467 Joined: 2/20/2006 From: San Antonio, TX Status: offline Its going to be hard. You need to put the jack under the engine, remove the mount bolts, raise it up a little.. and change it. _____________________________ These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you (in reply to Jre56) Post #: 4

RE: Motor mount - 6/25/2008 4:48:12 PM    Jre56   Posts: 7 Joined: 6/18/2008 Status: offline Is there anywhere I can buy the inserts and have them pressed in instead of replacing the entire mount? (in reply to Sebba) Post #: 5

RE: Motor mount - 6/25/2008 6:44:37 PM    Sebba Posts: 14467 Joined: 2/20/2006 From: San Antonio, TX Status: offline Yeah thats what I meant, my bad. _____________________________ These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you (in reply to Jre56) Post #: 6

RE: Motor mount - 6/25/2008 8:06:53 PM    Jre56   Posts: 7 Joined: 6/18/2008 Status: offline Ok, thanks for your help! Do you know if any of the newer model''s(2004-2007) use the same mount? Maybe I can go to a junkyard and buy one that''s already off. (in reply to Sebba) Post #: 7

RE: Motor mount - 6/25/2008 9:18:17 PM    Sebba Posts: 14467 Joined: 2/20/2006 From: San Antonio, TX Status: offline No _____________________________ These cranks are made for walkin'', and thats just what they''ll do, one of these days these cranks are gonna walk all over you (in reply to Jre56) Post #: 8

RE: Motor mount - 7/2/2008 5:15:22 AM    sk8dudety Posts: 2830 Joined: 7/17/2005 Status: offline yea you can definitely get the new inserts put in, but if i were you i''d replace all four of ''em while it was up in the air, that way instead of having only one urethane piece and having it be all awkward it''d feel a lot better for you. besides you have to buy it all in a kit anyway lol _____________________________ http://www.cardomain.com/ride/2937397/1 '95 GSX BOO YA! Tyler Miller "NO REPLACEMENT FOR DISPLACEMENT MY A$$!" (in reply to Sebba) Post #: 9

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mitsubishi Prices

Mitsubishi Vehicles
3000GT Lancer
Diamante Zinger
Eclipse Outlander
Endeavor Raider
Galant Lancer Evo

Top 10 Posters
sebba 14467 emonz57 11430 theengineer 10458 rcjr9186 5632 sanguinius 4760 dusty eclips 4368 davidmitsusr 3360 jpmontero98 3344 silvercoupe9 3146 sk8dudety 2830

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.