|
Larz2112 -> Programming the keyless remote, 2000 Eclipse? (6/26/2008 6:36:32 PM)
|
What do you use to ground the 1st and 4th data port terminals before putting the DLC into programming mode? My original keyless remote recently died. I replaced the battery but it still doesn''t work, so I bought a new one, which came with pretty simple instructions similar to the ones here: http://ebiz.netopia.com/pyr/mit490/
The instructions say to connect a jumper wire to terminals 1 and 4, but I''m not sure what to use for a jumper wire. The dealership wants to charge me $100 and said it would take 45 minutes to program, but based on the instructions it seems like it''s a five minute job. I just don''t know what to use as a jumper wire. Any help would be appreciated. Thanks.
|
|
|
|
