Intake Installation

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

Intake Installation

Printable Version

Mitsubishi >> Mitsubishi Models >> Mitsubishi Galant >> Intake Installation

Page: [1]

Message

<< Older Topic Newer Topic >>

Intake Installation - 8/17/2005 8:00:12 AM

proteusx301

Posts: 35
Joined: 7/29/2005
Status: offline

Does anyone have any tips or such for installing a CAI on a galant. My friend is going to help me put it in, because he has done it before. I just wanted to know if there is anything i should know about the 2003 galant, that would help in my installation. Thanks.

Post #: 1

RE: Intake Installation - 8/17/2005 11:26:01 AM

Prophet

Posts: 600
Joined: 10/29/2003
From: United States
Status: offline

The Galant is pretty straight forward. Take the oem off and put the new one on.

(in reply to proteusx301)

Post #: 2

RE: Intake Installation - 8/17/2005 12:11:24 PM

proteusx301

Posts: 35
Joined: 7/29/2005
Status: offline

Ok, thanks. I'll post some pics next week when i install it.

(in reply to proteusx301)

Post #: 3

RE: Intake Installation - 8/18/2005 10:18:08 PM

Atownprepy99

Posts: 73
Joined: 6/19/2005
Status: offline

Yea the install is pretty easy, I have pics of mine if you want to see, mine is an Injen intake. Real easy install if you know the basics. Just make sure you know what to do with the battery. My friend forgot to put the car into the accessory setting before starting it and the engine stalled.

< Message edited by Atownprepy99 -- 8/18/2005 10:19:46 PM >

(in reply to proteusx301)

Post #: 4

RE: Intake Installation - 8/19/2005 11:36:25 PM

proteusx301

Posts: 35
Joined: 7/29/2005
Status: offline

what do you have to do to the battery. Sorry im kinda a newb at this intake stuff.

(in reply to proteusx301)

Post #: 5

RE: Intake Installation - 8/20/2005 3:27:36 PM

Atownprepy99

Posts: 73
Joined: 6/19/2005
Status: offline

You have to detach the negative side of the battery by unscrewing the clamp. Do that before you even start the install. Then after you have the intake in, reconnect the negative side of the battery. Put the car into the accessories slot, the one right before you can start the car, for a few minutes (you'll hear the car make noises). Then after that start the car and let it idle for awhile. Then rev it to make sure everything is all good and your set to take her out.

(in reply to proteusx301)

Post #: 6

RE: Intake Installation - 8/20/2005 9:48:16 PM

proteusx301

Posts: 35
Joined: 7/29/2005
Status: offline

cool, thanks for your help.

(in reply to Atownprepy99)

Post #: 7