Installing an aftermarket sterio (Full Version)

Mitsubishi >> Show Time >> Audio/Visual Electronics

Installing an aftermarket sterio


  

Tmann26 -> Installing an aftermarket sterio (4/11/2004 12:19:18 PM)

Well, I want to install the sterio in my rex into the eclipse, however, I am trying to figure out an easier way to do it without cutting up alot of the wires.  Any suggestions out there?  I could also use a wiring diagram for the sterio if it isn't too much trouble.


  

91eclipse -> Installing an aftermarket sterio (4/14/2004 3:02:44 PM)

i did it, go buy a book for your car and cut away...thats is the ONLY way buddy. trust me ive been there....and when i was there i f**ked up my interior lights...but hey i got tunes!


 



rucujo -> Installing an aftermarket sterio (4/18/2004 8:47:53 AM)

STEREO....not sterio


Seth -> Installing an aftermarket sterio (4/18/2004 8:54:41 AM)

May i suggest if you don't know what you are doing get a pro to do it saves stuffing up your car.


Seth



madmat -> Installing an aftermarket sterio (4/18/2004 11:56:32 AM)

get a wiring harness that snaps into the factory harness and gives you prestripped , color coded wires. if you have to cut anything in the factory setup you don't need to be doing it yourself. Scosche industries makes wiring harnesses for almost every application and are available where any stereo equipment should be sold. if you don't have a walmart near by check w/ crutchfield or cardomain the harness shouldn't cost more than $15.


1rippinGT -> Installing an aftermarket sterio (4/19/2004 12:06:05 AM)

im going with madmat here cause i have installed plenty of car stereos before and i have had to cut and splice all of them except my 3000GT cause i just went and bought the install kit for it. all you do is unplug the stock stereo, plug it to the wiring harness, match the colors, them plug it in your deck and BAM!!!!!you got a new stereo


SpyderGS -> Installing an aftermarket sterio (4/19/2004 10:42:51 AM)

Harnesses make life much easier.  Cool madmat


madmat -> Installing an aftermarket sterio (4/19/2004 11:03:18 AM)

 I checked out scosche.com & 87 to 93 mitsu is part #MC01 and 94+ is # MI02 my wallyworld doesn't stock either one. I hope I got to you before you hacked up your car or paid someone else to.



91eclipse -> Installing an aftermarket sterio (4/19/2004 2:57:00 PM)

harnesses are hard to come by for aftermarket stereo's. i couldnt find one so i cut away and used heat shrink on the wires.


 







rucujo
Newbie
Newbie
Avatar

Joined: Apr/17/2004
Posts: 4







Posted: Apr/18/2004 at 8:47am | IP Logged | Report Post Quote rucujo



STEREO....not sterio

THANKS MAN!...


Tmann26 -> Installing an aftermarket sterio (4/19/2004 4:47:19 PM)

I dropped $65 for a shop to do it...  I have tunes and insturment lights, LOL  I messed up my RX-7's cluster lights installing the sterEo in it...  and I wasn't about to do it to my Spyder.


  

Page: [1] 2   next >   >>

Return to Mitsubishi Forum home page or view the Full Version of this page.