RE: were is he BOV located on a 1997 gst spyder (Full Version)

Mitsubishi Forum >> Tech Help and Information >> Everything else

RE: were is he BOV located on a 1997 gst spyder

  

anko_kun -> RE: were is he BOV located on a 1997 gst spyder (11/30/2005 1:11:30 PM)

thats alot of info i think i get it

  
EMonz57 -> RE: were is he BOV located on a 1997 gst spyder (11/30/2005 2:05:37 PM)


quote:

ORIGINAL: anko_kun

thats alot of info i think i get it

its not a hard concept really. the car isnt getting the amount of air it was expecting. think about it like this say "I" is the intake "M" where you are measureing the air flow "E" is for the engine and "B" is the open BOV then what it would look like is I..M.........B...E if you lose some air a "B" and "E" doesnt know, it still thinks it is there when its not so fuel is added for the air it is expecting when the lost air never shows up there ends up being way to much fuel added and it ends up rich, in my car it gets so rich that behind the car your eyes will burn a bit. in a car that uses MAP it goes I.......B..M..E so it measure the air after the BOV so the motor is getting exactly what it is taking in and doesnt lose anything

if that makes sence lol it is easier to me to see it but not sure it is for others

Patrick -> RE: were is he BOV located on a 1997 gst spyder (11/30/2005 3:58:41 PM)

Emonz, there is no MAS anywhere between the turbo, and the throttle body, which would lead me to believe that it does not use one. My stratus with a 6g72 has the MAS in the middle of my CAI, and if im not mistaken, yours is similar to mine, with the black box?

also, i have seen Plenty of daytonas running Atmospheric BOVs, and some of them are pretty quick, with very little done, such as not Cat, performance ECU, bigger TB, etc.

EMonz57 -> RE: were is he BOV located on a 1997 gst spyder (11/30/2005 4:07:03 PM)

quote:

ORIGINAL: Patrick

Emonz, there is no MAS anywhere between the turbo, and the throttle body, which would lead me to believe that it does not use one. My stratus with a 6g72 has the MAS in the middle of my CAI, and if im not mistaken, yours is similar to mine, with the black box?

also, i have seen Plenty of daytonas running Atmospheric BOVs, and some of them are pretty quick, with very little done, such as not Cat, performance ECU, bigger TB, etc.

well the MAS on a turbo car is between the filter and turbo yes it looks identicle to the stratus same shape black box here is how it looks on a turbo car of course you can see the upper IC pipe isnt connected to the MAS at all just the turbo and air filter. in the daytona the turbo is in back i think right? so yould need to see if its there I think they may use MAP so venting a BOV will pose as no problem at all

[image]http://i33.photobucket.com/albums/d98/Turbo3G/MASPLATE.jpg[/image]

Patrick -> RE: were is he BOV located on a 1997 gst spyder (11/30/2005 4:28:43 PM)

highlighting a MAS adapted for someone there? i have the same thing on my computer for the 6g72...

thanks for the info..i wasnt sure, but i think that now, ill be ok with a nice loud BOV....[:D]

anko_kun -> RE: were is he BOV located on a 1997 gst spyder (11/30/2005 5:25:03 PM)

if you can help me find a 1-gen BOV i would thank you

EMonz57 -> RE: were is he BOV located on a 1997 gst spyder (11/30/2005 7:46:40 PM)

Ebay is your friend for that one 1G on EBAY

anko_kun -> RE: were is he BOV located on a 1997 gst spyder (12/3/2005 2:16:12 PM)

ok

  

Page: <<   < prev  1 2 3 [4]

Return to Mitsubishi Forum home page or view the Full Version of this page.