Addinga Power wire through a firewall. (Full Version)

Mitsubishi >> Show Time >> Audio/Visual Electronics

Addinga Power wire through a firewall.

  

jimbo_limited -> Addinga Power wire through a firewall. (1/23/2006 5:36:09 PM)

I have a 96 Eclipse Rs and i cannot find a way to install the power wire for the amp.


Can anyone tell me where i can add the wire through the firewall?

thanks

  
Ryan -> RE: Addinga Power wire through a firewall. (1/23/2006 8:59:07 PM)

Hey I had the same problem running my positive wire in my 2000 Eclipse GT. I ran an 1/0 gauge positive through the firewall by simply drilling a hole and then siliconeing it. That's about the only advise I can give you. Hope it helps you.

jeffery0266 -> RE: Addinga Power wire through a firewall. (3/15/2006 4:16:08 PM)

I have a 95 rs and I ran the power wire to the passenger side,there is a bunch of wires there and I just pushed it through and had someone grab it and pull it on through.It wasn't that hard to do.

ictponder -> RE: Addinga Power wire through a firewall. (3/15/2006 7:21:11 PM)

quote:

ORIGINAL: Ryan

Hey I had the same problem running my positive wire in my 2000 Eclipse GT. I ran an 1/0 gauge positive through the firewall by simply drilling a hole and then siliconeing it. That's about the only advise I can give you. Hope it helps you.


If you look behind the carpet on the drivers side, you will see a wire harness going through the side leading to the fusebox in the engine compartment. It take a bit more finess than drilling a hole in metal, but the end product is much more to be desired. You can also use a spare slot in the fuse box for a fuse for your amp.

  

Page: [1]

Return to Mitsubishi Forum home page or view the Full Version of this page.