bent vavle (Full Version)

Mitsubishi >> Tech Help and Information >> Internal Lounge

bent vavle

  

95HGeclipse -> bent vavle (4/30/2006 9:28:53 PM)

when i first got my eclipse i knew it had a bent vavle in the head from it not bein timed right but the vavle didnt snap its just bent does that mean the head is ****ed now or would it be ok to take it to get hot tanked and a stage3 port&polish job done the reason im asking this is because slowboyracing heads are expected 4-6 weeks to be done and im trying to get my engine done in two weeks

  
slow420a -> RE: bent vavle (5/1/2006 8:23:55 AM)

depends on the dammage. My friend who has a gst spyder did that and his head was fine, on the other hand I have seen valves pushed and pressed into the head. The only way to know is by taking the hed off and looking at the valve port to see the actual dammage done.

Evil1993Eagle -> RE: bent vavle (5/16/2006 6:11:39 PM)

Most likely the valve guide has damage.

93eclipsegsx -> RE: bent vavle (5/18/2006 10:04:53 PM)

true, your going to need a new guide as well, but a new valve also.

Evil1993Eagle -> RE: bent vavle (5/18/2006 11:03:37 PM)

Might as well do an all out head rebuild. Call jnz tuning, they do great work.

95HGeclipse -> RE: bent vavle (5/22/2006 11:11:02 PM)

yeah my mind is goin back and forth about if i should redo the head or just buy the stage three from slow boy racing but they take like six weeks to get one reddy but getting the head rebuilt takes a bit of time to im just trying to find the cheapest and fastest way

TheEngineer -> RE: bent vavle (5/23/2006 10:43:10 AM)

cheapest way...bring it to a good machine shop, and have them check it out. They will tell you exactly what needs to be done and ussualy depending on the shop it can be done in a couple weeks. My guess is that more than one valve is bent, even only one may look it, there has to be more. So i would say for the quick fix, bring it to them and it will probably cost around $500

Evil1993Eagle -> RE: bent vavle (5/23/2006 6:26:20 PM)

Another quick fix would be getting a used head off ebay for like $200.00.

TheEngineer -> RE: bent vavle (5/24/2006 1:16:21 PM)


quote:

ORIGINAL: Evil1993Eagle

Another quick fix would be getting a used head off ebay for like $200.00.

i dont know that i would trust that very much. Its definetly better to save yourself in the long run by paying the extra 300 now and save you from any further problems down the road

93eclipsegsx -> RE: bent vavle (5/24/2006 5:34:24 PM)

i bought my head on ebay for 600 and ive had no problems with it and even took it to napa because i know the the machinest that dos head work and he looked mine over and said it was real good.

  

Page: [1] 2   next >   >>

Return to Mitsubishi Forum home page or view the Full Version of this page.