ET

Printable Version

Mitsubishi >> Mitsubishi Models >> Mitsubishi Mirage >> ET

Page: [1]

Login Message << Older Topic   Newer Topic >>

ET - 5/27/2006 7:43:37 PM    396NOVA   Posts: 15 Joined: 5/27/2006 Status: offline What type of times should a guy I know with a 88 Mitsubishi Colt with a 93 Eclipse 2 litre with ported and polished heads and a five speed expect. It also has headers and I beleive a higher lift cam. Post #: 1

RE: ET - 5/27/2006 7:45:35 PM    Sebba Posts: 14165 Joined: 2/20/2006 From: San Antonio, TX Status: online Depends what eclipse... is it the 420a or the 4G63T _____________________________ (in reply to 396NOVA) Post #: 2

RE: ET - 5/27/2006 7:50:10 PM    396NOVA   Posts: 15 Joined: 5/27/2006 Status: offline Im not sure. I can ask him when I see him. The exhaust doesn't line up right with the header, its about an inch and a half off so he has to get a custom pipe made. He doesn't want to risk driving it much yet but is anxious to get it to the strip. What is the difference between the two, if I know that I might be able to figure it out. I seen the car it came out of because he bought the entire car, it had gotten into a minor accident and the guy just decided to sell the car for 600 bucks. Im guessing one of the models is worth less than the other, it would most likely be the cheaper one. (in reply to 396NOVA) Post #: 3

RE: ET - 5/27/2006 7:55:37 PM    Sebba Posts: 14165 Joined: 2/20/2006 From: San Antonio, TX Status: online The 4G63 is the turbo model and usually the more expensive. I would also need to know if it is a GST (FWD) or a GSX (AWD) _____________________________ (in reply to 396NOVA) Post #: 4

RE: ET - 5/27/2006 7:56:39 PM    396NOVA   Posts: 15 Joined: 5/27/2006 Status: offline Ok, it wasn't a turbo and it was FWD, I know that. (in reply to Sebba) Post #: 5

RE: ET - 5/27/2006 8:02:11 PM    Sebba Posts: 14165 Joined: 2/20/2006 From: San Antonio, TX Status: online Well i dont know exact numbers.... but its slow _____________________________ (in reply to 396NOVA) Post #: 6

RE: ET - 5/27/2006 8:07:46 PM    396NOVA   Posts: 15 Joined: 5/27/2006 Status: offline Yeah, he plans to get the turbo for it. He didnt really build it for speed, it has a nice paint job and aftermarket rims and NO FART CAN EXHAUST. The head on the original engine cracked and it was cheaper for him to buy the eclipse for the engine than another engine for HIS car. (in reply to Sebba) Post #: 7

RE: ET - 5/27/2006 8:12:33 PM    Sebba Posts: 14165 Joined: 2/20/2006 From: San Antonio, TX Status: online Try doing a search on turbo 420a and you will see why turboing that engine is a real bad idea _____________________________ (in reply to 396NOVA) Post #: 8

RE: ET - 5/28/2006 11:13:45 PM    00Mirage Posts: 456 Joined: 3/29/2006 Status: offline i bet he would run like a mid 16 maybe? depending on the driver (in reply to Sebba) Post #: 9

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mitsubishi Prices

Mitsubishi Vehicles
3000GT Lancer
Diamante Zinger
Eclipse Outlander
Endeavor Raider
Galant Lancer Evo

Top 10 Posters
sebba 14165 emonz57 11262 theengineer 10296 rcjr9186 5631 sanguinius 4753 dusty eclips 4364 davidmitsusr 3359 jpmontero98 3289 silvercoupe9 3038 tidus10 2767

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.