Serpentine belt replacement 2000 M sport

Printable Version

Mitsubishi Forum >> Mitsubishi Models >> Mitsubishi Montero & Montero Sport >> Serpentine belt replacement 2000 M sport

Page: [1]

Login Message << Older Topic   Newer Topic >>

Serpentine belt replacement 2000 M sport - 8/8/2006 11:22:14 PM    montero mike   Posts: 4 Joined: 8/8/2006 Status: offline Hello. Does anyone know how to replace a serpentine belt for a 2000 Montero Sport LS 3.0. Ie. what needs to be removed first, tips, what not to do??? Post #: 1

RE: Serpentine belt replacement 2000 M sport - 8/10/2006 1:52:05 PM    off roader   Posts: 419 Joined: 10/20/2005 Status: offline Although yours may be a DOHC engine, it's probably somewhat similar to my SOHC engine. Based on mine, you'll essentially need to remove everything from the front of the engine (Fan shroud, AC, Alternator, Steering Pump, Fan etc.). While you're at it, you should also consider replacing your water pump, possibly your front seal, your idler pulley, etc. as these items will be accessable when doing this job. It may also make it easier if you remove your radiator so you have better access to the front of your engine. If so, you may want to have it "rodded" as a preventative measure. Let me know if you want to know how to check it to see if it needs to be rodded. HTH. (in reply to montero mike) Post #: 2

RE: Serpentine belt replacement 2000 M sport - 8/10/2006 5:43:11 PM    Winshawn   Posts: 269 Joined: 1/31/2005 Status: offline Are you talking about the serpentine belt that goes to the alternator, PS pump, etc? Or are you talking about the timing belt. Winston _____________________________ '90 Montero (sold-sadly) '95 Montero LS (166k) - my car '03 Montero Limited (36k) - wife's car (in reply to montero mike) Post #: 3

RE: Serpentine belt replacement 2000 M sport - 8/10/2006 6:19:42 PM    off roader   Posts: 419 Joined: 10/20/2005 Status: offline quote: ORIGINAL: Winshawn Are you talking about the serpentine belt that goes to the alternator, PS pump, etc? Or are you talking about the timing belt. Winston Good catch Winston. Sorry for any confussion but I'm refering to a Timing belt change in my process description. Happened because I was doing multiple things while responding. Let me guess for the serpentine belt you'll need to loosen a bolt and swing an alternator, ac compressor, etc. in such a was that you relieve pressure on the belt and then simply remove it? < Message edited by off roader -- 8/10/2006 6:20:11 PM > (in reply to Winshawn) Post #: 4

RE: Serpentine belt replacement 2000 M sport - 8/10/2006 10:52:06 PM    montero mike   Posts: 4 Joined: 8/8/2006 Status: offline Thanks for the replies. This is a serpentine belt replacement. (in reply to off roader) Post #: 5

RE: Serpentine belt replacement 2000 M sport - 8/11/2006 1:09:34 PM    Winshawn   Posts: 269 Joined: 1/31/2005 Status: offline If it has the tensioner like my '03, you will need a 1/2" socket to "unload" the tensioner and an allen key or a nail to put in the little hole to keep the tensioner "cocked". Beyond that, I am not sure if it will be necessary to remove the fan shroud to get the belt off. My FSM does not mention the removal of the shroud to changeout the belt. _____________________________ '90 Montero (sold-sadly) '95 Montero LS (166k) - my car '03 Montero Limited (36k) - wife's car (in reply to montero mike) Post #: 6

RE: Serpentine belt replacement 2000 M sport - 8/11/2006 10:34:10 PM    montero mike   Posts: 4 Joined: 8/8/2006 Status: offline I see what you're talking about. But the tensioner on the top is for 1 of the 2 flat belts that is still in good shape. There are 3 belts. 1 V & 2 flat. The 1st flat belt is for the steering pump and the 2nd flat belt flat belt (alternator) is the one that is worn. I don't see a tensioner for that 2nd belt. (in reply to montero mike) Post #: 7

RE: Serpentine belt replacement 2000 M sport - 8/14/2006 11:17:39 AM    Winshawn   Posts: 269 Joined: 1/31/2005 Status: offline Once you are in there changing belts, I would change all three. If there is no tensioner for the Alternator belt there is probably a slotted bracket for the alternator that allows you to adjust the tension. You will need to loosen both bolts on the alternator in order to loosen the belt. _____________________________ '90 Montero (sold-sadly) '95 Montero LS (166k) - my car '03 Montero Limited (36k) - wife's car (in reply to montero mike) Post #: 8

RE: Serpentine belt replacement 2000 M sport - 8/17/2006 7:58:05 PM    montero mike   Posts: 4 Joined: 8/8/2006 Status: offline I'll check it out. Thanks for your help, I appreciate it. (in reply to Winshawn) Post #: 9

RE: Serpentine belt replacement 2000 M sport - 2/14/2007 1:06:18 PM    00Sport   Posts: 5 Joined: 6/27/2005 Status: offline I don't mean to thread jack but this is related and I thought I'd post here before making a new thread... I've replaced my AC belt (00 3.0L Montero Sport) and there is a bit of slack I need to take out, but I can't figure out how the tensioner works. Any tips? Thanks! _____________________________ What it is? (in reply to montero mike) Post #: 10

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Mitsubishi Prices

Mitsubishi Vehicles
3000GT Lancer
Diamante Zinger
Eclipse Outlander
Endeavor Raider
Galant Lancer Evo

Top 10 Posters
sebba 14591 emonz57 11559 theengineer 10592 rcjr9186 5632 sanguinius 4762 dusty eclips 4370 jpmontero98 3378 davidmitsusr 3360 silvercoupe9 3255 sk8dudety 2867

New Vendors
AMSOIL - Performance Oil Technology