Okay i have a 2ng TSI Talon i was wondering could i build a 6bolt non-turbo motor out of a 1gn and put it in my 2ng. I will be building it for turbo of course. Can i also use the 5bolt 4g63 head on the 6bolt block.
Sebba -> RE: 6 Bolt (10/31/2006 5:22:30 PM)
Yes you can but you will need a 6 bolt flywheel etc.. you can get a 6bolt install kit for a 2g on www.slowboyracing.com
TheEngineer -> RE: 6 Bolt (11/1/2006 7:48:26 AM)
there is no 5-bolt they are 6 and 7 bolt. Your talon has a 7 bolt and the 1990-1992 eclipses had the 6-bolt.
BoostWhore95 -> RE: 6 Bolt (11/1/2006 4:48:49 PM)
Yea Sorry I meant can i use the 7bolt head on the 6bolt bottom end.
TheEngineer -> RE: 6 Bolt (11/2/2006 9:30:10 AM)
yea i believe so, you just need to do some minor rewiring of the cam sensor. I think most people that do the swap actually keep the stock 2g head
tx2u -> RE: 6 Bolt (3/4/2007 11:20:12 PM)
Road Racing Engineering (RRE) has a good write up on this.
TheEngineer -> RE: 6 Bolt (3/5/2007 11:31:18 AM)
quote:
ORIGINAL: tx2u
Road Racing Engineering (RRE) has a good write up on this.
Actually i kinda find magnus a better one for the install
