1.8l wiring harness on 2.0 motor

Mitsubishi Forum Classifieds Photo Gallery Timeslips Member List Search Sponsors Contact MF
Mitsubishi Lineup Mitsubishi News Recalls TSBs Timeslips Calendars Register Login

1.8l wiring harness on 2.0 motor

Printable Version

Mitsubishi >> General Mitsubishi Forums >> General Mitsubishi Chat >> 1.8l wiring harness on 2.0 motor

Page: [1]

Message

<< Older Topic Newer Topic >>

1.8l wiring harness on 2.0 motor - 11/8/2006 5:48:31 PM

royb04

Posts: 1
Joined: 11/2/2006
Status: offline

CAN ANYONE HELP ME? I am wiring a 4g63 with a 1.8 liter wiring harness. Any advise. (cant aford 300-500 harness) and cant find one if i could. I have used alldata, hanes, and chiltons wiring diagrams but there is some things missing. Like the inputs on the 1.8l mpfi reley. Where do i run the 3rd wire (red) on the crank/cam angle sensor on that reley. Is it input or out put to the mpfi relay. I cant get any spark. and the fuel pump wont turn on. I have the 4g ecu hooked up and pins have been move for fuel pump and wires ran for coil. am i missing something. I might just run a switch to the fuel pump if i can get spark.

And i also need a oil pan for a 4g63.
If anyone has a harness for cheep i need one of those too.

Post #: 1

RE: 1.8l wiring harness on 2.0 motor - 11/8/2006 6:24:39 PM

Sanguinius

Ownz ALL threads
Posts: 4760
Joined: 3/27/2005
Status: offline

Dude why in god's green earth are you reinventing the wheel???

Go to a local junkyard/pick'n'pull and you can pick up a wiring harness for MUCH less than $100 I'm sure. You may have to go through the trouble of pulling it yourself but it will save TONS of trouble in the long run if you ask me.

_____________________________