RE: turbo it or swap
Login  | |
|
RE: turbo it or swap - 11/12/2006 11:51:32 AM
|
|
|
zod
Posts: 19
Joined: 11/11/2006
Status: offline
|
here is the link ~~~~~~~~~~> http://www.mitsubishiforum.com/m_95911/tm.htm <~~~~~~~~~~~~
is this the head i need ?
i see a few on ebay to with cams i think i will get one from ebay that has the cams
oh and whats way is the DIY way ?? sorry not good with the lingo yet:P
DIY = do it yourself ?
< Message edited by zod -- 11/12/2006 12:07:44 PM >
_____________________________
Live your dreams.
|
|
|
|
|
|
|
RE: turbo it or swap - 11/13/2006 10:18:53 AM
|
|
|
TheEngineer
Posts: 10296
Joined: 1/25/2006
Status: offline
|
yup DIY=do it yourself. Too bad you wernt around alittle while ago, i had i head that i just sold for 250. and that included everything. PM 93eclipsegsx on here. I know he has an extra head lying around. Im not sure if you can use the 1g head though. The only thing im wonding here, and i havnt read any of the writups so im not sure, but can you bolt a 4g63 AWD tranny to a 4g64?
_____________________________
quote:
ORIGINAL: pilsenblue
Even tho My car looks great It will never be fast. Kinda like a hot girl that dosent give it up
|
|
|
|
|
RE: turbo it or swap - 11/13/2006 6:46:26 PM
|
|
|
silvercoupe97
Posts: 3038
Joined: 11/10/2006
Status: offline
|
quote:
ORIGINAL: silvercoupe97
http://www.dsmtalk.com/forums/showthread.php?t=132314&highlight=2.4+swap
There are pages of info on this swap. It's a really long read and you gotta push past the BS, but a good read nonetheless.
*wrong link, lol. Let me find it again.
Zod posted the write up for this swap.
http://www.extremeevolutions.com/4G64_buildup.htm
63 tranny works just fine, you'll need that tranny for the transfer case.
< Message edited by silvercoupe97 -- 11/13/2006 6:58:40 PM >
_____________________________
Thanks,
John
6 bolt/2g head,1G rods/2G pistons,FPBig28,MBC,Forge 1G DV,alky inj,AFPR,255lph,780cc, 3" turboback,Centerforce,4 spider,FMIC, Prosport Boost&EGT gauges,AEM wideband,DSMlink, AGX/Skunk2
|
|
|
|
|
RE: turbo it or swap - 11/13/2006 7:11:44 PM
|
|
|
zod
Posts: 19
Joined: 11/11/2006
Status: offline
|
well i am going to start with just the motor, i get payed not this thursday but next am i will go on a hunt for a head then two weeks after that cam's then pistons then rods then the turbo itself .. how must bost can i go and how much HP will i have ?
_____________________________
Live your dreams.
|
|
|
|
|
RE: turbo it or swap - 11/14/2006 1:47:55 AM
|
|
|
silvercoupe97
Posts: 3038
Joined: 11/10/2006
Status: offline
|
quote:
ORIGINAL: zod
well i am going to start with just the motor, i get payed not this thursday but next am i will go on a hunt for a head then two weeks after that cam's then pistons then rods then the turbo itself .. how must bost can i go and how much HP will i have ?
The motor can knowingly handle 400hp in stock form. Some 4g63 motors are freaks of nature and maybe able to handle more, that's up to you to find out, lol.
HP is only limited on the build, turbo size, fuel, air, and management. Those will be up to you
Here's the actual link that I was looking for. I had a few opened up and I think I grabbed the wrong one, but here's the one.
http://www.dsmtalk.com/forums/showthread.php?t=31111&highlight=2.4+swap
< Message edited by silvercoupe97 -- 11/14/2006 1:50:41 AM >
_____________________________
Thanks,
John
6 bolt/2g head,1G rods/2G pistons,FPBig28,MBC,Forge 1G DV,alky inj,AFPR,255lph,780cc, 3" turboback,Centerforce,4 spider,FMIC, Prosport Boost&EGT gauges,AEM wideband,DSMlink, AGX/Skunk2
|
|
|
|
|
Printable Version
