Mitsubishi Forums Mitsubishi Forums    
   
Mitsubishi
Mitsubishi Forum   Classifieds   Photo Gallery   Timeslips   Member List   Search   Sponsors   Contact MF
  Mitsubishi Lineup   Mitsubishi News   Recalls   TSBs   Timeslips   Calendars   Register   Login  

Ignition problem!!

  Printable Version
Mitsubishi Forum >> Tech Help and Information >> PCM & Fuel Systems >> Ignition problem!! Page: [1] 2 3   next >   >>
Login
Message << Older Topic   Newer Topic >>
Ignition problem!! - 11/13/2006 10:38:48 PM   
juve0882

 

Posts: 9
Joined: 11/13/2006
Status: offline
I have a 95 eclipse non turbo 2.0L, I have replaced the crankshaft position sensor, coil pack, changed the spark plug wires. I am going to change the camshaft position sensor tomorrow, but if that doesn't work, what would be the problem? The car turns over and everything but does not start. I took a spark plug wire off and checked for sparks but didn't get anything....So i need help on what other sensors there are that are tied to the Ignition System..(Crankshaft, Camshaft, and thats all the sensors that i know) So if anyone can relate or help with this problem it will be very helpful.. Thanks
Post #: 1
RE: Ignition problem!! - 11/14/2006 8:32:03 AM   
TheEngineer



Posts: 10261
Joined: 1/25/2006
Status: offline
TheEngineer's photo gallery
sounds like a cam position sensor to me. I dont know what else it could be if its turning over but getting no spark

_____________________________



quote:

ORIGINAL: pilsenblue
Even tho My car looks great It will never be fast. Kinda like a hot girl that dosent give it up


(in reply to juve0882)
Post #: 2
RE: Ignition problem!! - 11/14/2006 12:29:24 PM   
juve0882

 

Posts: 9
Joined: 11/13/2006
Status: offline
Hey could it maybe be the fuel pump relay?

(in reply to TheEngineer)
Post #: 3
RE: Ignition problem!! - 11/14/2006 12:31:19 PM   
TheEngineer



Posts: 10261
Joined: 1/25/2006
Status: offline
TheEngineer's photo gallery
in that case though i would think you would get spark. IDK though. When your turning it over see if you can hear the fuel pump

_____________________________



quote:

ORIGINAL: pilsenblue
Even tho My car looks great It will never be fast. Kinda like a hot girl that dosent give it up


(in reply to juve0882)
Post #: 4
RE: Ignition problem!! - 11/14/2006 6:42:21 PM   
juve0882

 

Posts: 9
Joined: 11/13/2006
Status: offline
ok thanks im going to replace the camshaft and the fuel pump relay and see if that works.. I'll let you guys know

(in reply to TheEngineer)
Post #: 5
RE: Ignition problem!! - 11/17/2006 11:30:13 PM   
juve0882

 

Posts: 9
Joined: 11/13/2006
Status: offline
Ok so i replaced the Cam shaft position sensor and still got nothing.. The fuel pump relay is good, so no need to replace that. I tested the fuel pump and its running. But the weird thing is that i am getting no gas. I took off the nozzle on the gas line thing and pushed the button and recieved no gas.. I think it might be the PCM..I have done everything you can possibly do. I used the Hanes mitsubishi eclipse guide book to do all the test involved with the ignition and electrical system.. Do you have any other idea what it could be? Still not getting any fire what so ever. I did spray starter fluid in it and it wanted to start at one point and then it stop.

(in reply to juve0882)
Post #: 6
RE: Ignition problem!! - 12/14/2006 3:05:26 PM   
slightflyer

 

Posts: 2
Joined: 12/14/2006
Status: offline
I have the same problem, but the model is eclipse 92 GS, no gasoline, not hear the fuel pump and I don't know where the relay is; and no spark at all. Do you have some idea about the problem ?

(in reply to juve0882)
Post #: 7
RE: Ignition problem!! - 12/17/2006 1:59:41 PM   
juve0882

 

Posts: 9
Joined: 11/13/2006
Status: offline
hey whats up slight flyer..i have done every test that hanes has in the book that ties with the ignition and nothing works, so my guess is that its the ECU so i guess i need a ecu for it.. but i would invest in the hanes manuel for your car..its great and very helpful..good luck! if you find anything else let me know

(in reply to slightflyer)
Post #: 8
RE: Ignition problem!! - 4/29/2007 6:02:40 PM   
johnthornhill

 

Posts: 22
Joined: 4/26/2007
Status: offline
Hello everyone. I know this is an older posting but I really need to knoe if the problem was ever resolved and if so HOW? I have a 97 GS that is doing the same thing and I'm running out of ideas. no I have ran out of them. PLEASE HELP!!!!!!!!!

(in reply to juve0882)
Post #: 9
RE: Ignition problem!! - 4/29/2007 6:53:59 PM   
silvercoupe97



Posts: 3012
Joined: 11/10/2006
Status: offline
silvercoupe97's photo gallery
It can also be the ASD relay and ECU.
Here's some more info on the ASD that I just posted up.
http://www.mitsubishiforum.com/m_137146/mpage_1/key_/tm.htm#137146

< Message edited by silvercoupe97 -- 4/30/2007 2:27:44 AM >


_____________________________

Thanks,
John
6 bolt/2g head,1G rods/2G pistons,FPBig28,MBC,Forge 1G DV,alky inj,AFPR,255lph,780cc, 3" turboback,Centerforce,4 spider,FMIC, Prosport Boost&EGT gauges,AEM wideband,DSMlink, AGX/Skunk2

(in reply to johnthornhill)
Post #: 10
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2 3   next >   >>

 
Mitsubishi >> Tech Help and Information >> PCM & Fuel Systems
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
sebba14005
emonz5711216
theengineer10261
rcjr91865629
sanguinius4753
dusty eclips4364
davidmitsusr3351
jpmontero983289
silvercoupe93012
tidus102767

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

Mitsubishi Forum .com is not affiliated with or endorsed by Mitsubishi Motors.